- -12%
Reference: 534227
Kit bearings + reinforced TEKNIX spy joints for Peugeot Fox
Reinforced bearing with riveted steel cage with high-end oil seal.
Banner
Here is the DOPPLER crankshaft for Peugeot Fox / HONDA Wallaroo, reinforced model, balanced and in full masses, it is really intended for the reinforcement of the low engine and the performance. The steels used are of the highest quality, treated and well hardened, the balancing is dynamic and really neat!
An excellent finish, the connecting rod is placed on a reinforced crank pin and a well increased cage with anti-friction wedges. Aluminum plugs obviously cover the balancing holes. For more pre-compression, the masses are full. The lubrication is also reviewed and corrected. The connecting rod is a well-designed high-end model, casting mode of manufacture.
Clearly, this crankshaft will withstand most well-equipped engines, it offers excellent performance and resistance to match! The connecting rod size, the stroke, the diameter of the bristles remain as the origin. Delivered with its needle cage Ø12X15X15mm.
This crankshaft is normally recommended for Peugeot fox and Honda wallaroo but normally on Fox, the zone C therefore the stroke is 0.10mm longer and the zone F therefore the length of the variator arm is 10mm longer on the Peugeot fox! So we recommend this crankshaft for wallaroo only.
Reference: 534227
Reinforced bearing with riveted steel cage with high-end oil seal.