Reference: 144.230.004
Single pipe elbow 95 ° offset POLINI reinforced Øinterne 18 to 20mm
POLINI hose for tip from 17 to 19mm.
Banner
This PIAGGIO ORIGINAL water pump is basic reserved for the following PIAGGIO :
APRILIA SR MAX (125cc) from 2011 to 2013
GILERA NEXUS (125cc) from 2008 to 2009
PIAGGIO BEVERLY RST 4T 4V IE EURO3 (125 cc) from 2010 to 2015
PIAGGIO MP3 (125cc) from 2009 to 2012
PIAGGIO MP3 HYBRID (125cc) from 2009 to 2009
PIAGGIO MP3 YOURBAN (125cc) from 2011 to 2013
PIAGGIO X7 EURO3 (125cc) from 2009 to 2009
, but it can be used on other machines. Many brands have water pump outlets yes but... Unsuitable for our 2 wheels, too heavy, too big, badly oriented outlets, too greedy in current, too fragile and therefore inefficient. Identical to the MALOSSI 5616363 pump but delivered without cables.
Thanks to it, you can finally replace the original water pump and thus improve the efficiency of your cooling! Intended for 50 to 150cc 2 or 4-stroke liquid-cooled scooters or motorcycles equipped with a mechanical water pump driven by the engine or electric.
It has several advantages, it eliminates friction and mechanical problems, it is silent and its assembly is really simple with an explanatory note provided and all the accessories necessary for its installation and operation.
That's not all, the internal electronic management of the pump has also been improved so as to maintain the scope of the constant supply range between 9 V and 15 V. It turns at 3200 rpm. IP55 protection standard. About 1200 liters / hour!
*Very small with straight outputs, it can be hidden, for example, behind the hearing of MBK 51, behind the radiator. For the purge, the tests, it starts with a simple 9V square battery!
Red wire on +12V DC (rectifier output, even without battery)
Black on ground
Ø of pipes: 20mm
Voltage 9 to 15V
Ideal voltage 12V
L per hour brewed: 1200L / H in the best case, i.e. 20L / Minute for 20w of consumption
Temperature: -40°C to 135°C
Speed: 3200 rpm under 12V
Reference: 144.230.004
POLINI hose for tip from 17 to 19mm.
Reference: 144.230.003
POLINI hose with internal diameter of 18mm therefore ideal for ends from 17 to 20mm.
Reference: 21 0870B
A high-end necklace that allows to squeeze harder without risk of breakage.
Reference: 133477
Transparent cooling hose internal diameter 20mm sold by 1m.
Reference: 174705
Ype original voltage with Rétgulateur Coisse 4 branch for motorcycles KTM and Yamaha 125cc 2T.
Reference: 107798 / 112652
Competition liquid, offers cooling down to -15 ° compared to a traditional liquid!