Reference: JAC-09
BARIKIT 5mm base block for MINARELLI HORIZONTAL (ovetto, nitro, aerox, jog ...)
The shim necessary for crankshafts 85mm long connecting rod on horizontal minarelli!
Banner
Set of 4 elongated competition cylinder head nuts, very similar to MALOSSI if not identical. These nuts allow you to take out the fins on the air cylinder head and to be able to tighten them with the flat torque wrench therefore in the absence of any friction which allows you a perfect tightening. You will have to use them with 4 washers of course. Mount them with a little grease, so as to make a well-balanced tightening without forcing.
Length 35mm
Original type thread therefore M7 Peugeot 103 and MBK 51/motobecane (av10) av7...
Weight of the 4 nuts: 72 grams
Maximum thread size that can fit into the nut: 30mm
They are widely used in competition on air or even liquid cylinder head. Some have already spoken of virtues in cooling but they do not improve cooling in any way even if the heat exchange surface is clearly enlarged, steel remains a poor material in terms of heat exchange.
Reference: JAC-09
The shim necessary for crankshafts 85mm long connecting rod on horizontal minarelli!
Reference: 19 9419Q
Ideal for replacing your old bolts MALOSSI MHR.
Reference: 1012877
Ideal for plugging carburettor air intakes or cylinder head.
Reference: 311.0112
POLINI bolt connection for Minarelli or Piaggio and many other models.
Reference: X4 12512042
Reinforced and elongated nuts to better tighten the cylinder head and more precisely. They can withstand much higher tightening torques!
Reference: S.1447 - 001447 (PIAGGIO)
Ideal in case of breakage, loss or worn thread of your old nut.
Reference: JAC-08
The shim needed to run long crankshafts 43/44 / 45mm on minarelli horizontal!
Reference: P95107000
BIDALOT high quality cylinder head nut!
Reference: 87181000
Ideal in case of breakage, loss or worn thread of your old nut.
Reference: 66 4696.J0
Ideal for having more precise assemblies.
Reference: 87175000
Ideal in case of breakage, loss or worn thread of your old nut.
Reference: 12512870
Reinforced and treated high-end stud for high engine BIDALOT Racing FACTORY.
Reference: 472434
Ideal for redoing a cylinder in the event of primer, heating or simply to remove micro-scratches that hold the oil.
Reference: 156263
Set of 4 M7 nuts with their 4 washers.
Reference: GR00711
For refurbishment of your high engine 70cc black DR Racing on minarelli horizontal liquid scooter.
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.