Reference: 1213035B
Valve diffuser (venturi) of valve MALOSSI VL6 and VL15
An obligatory product for a perfect functioning of the gas supply.
Banner
Valves that we recommend for a carburation of 17.5 to 28mm, they are excellent on small, medium and large configuration. They are delivered with 0.30mm slats in carbon or karbonit according to your choice.
You can buy separately a set of slats of all thicknesses to make better settings (namely that the motors which speak at low speeds (torque) will accept thinner slats and the motors which speak at very high speeds will require very thin slats. rigid (like 0.40mm).These valves are delivered with a diffuser (venturi), do not make the mistake of removing it!This diffuser brings you performance.The ideal is to align your pipe to this diffuser.
They are intended for minarelli am6, derbi euro 1,2 and 3, MALOSSI MG casings, vertical Minarelli with big polini valve, MBK 51 with ATHENA casings, GIRAUDO, Peugeot 103 with MALOSSI casings...
Reference: 1213035B
An obligatory product for a perfect functioning of the gas supply.
Reference: 27 5614.C0
A premium carbon blade set, ideal for optimal adjustment.
Reference: 27 5614.K0
A set of KARBONIT slats, very nice to adjust your machine to the thickness of the valve slats by taking advantage of a good quality of KARBONIT fiber for a nicer cost than carbon.
Reference: 213.0036
High quality valves, delivered with 2 different thicknesses of carbon slats!
Reference: 53400.12
PARMAKIT valves for your mécaboite 50cc MINARELLI AM6 engine!
Reference: 2714152.C0
Much improved version of MALOSSI VL15!
Reference: 440167
High quality slats to better exploit the high revs of your motorcycle 50cc am6 engine!
Reference: 9933770
Replacement valve slats for V FORCE boxes on minarelli am6.
Reference: 511244
Quality valve for your MINARELLI AM6, DERBI EURO 2, 3 and 4 engine.
Reference: 213.0526
High quality carbon slats. Set of 0.30 and play of 0.35mm.
Reference: 1213035B
An obligatory product for a perfect functioning of the gas supply.
Reference: 365091
DOPPLER ER3 competition valves with carbon slats!
Reference: 009512
High quality competition valves, bonded aluminum base!
Reference: 279479
DOPPLER competition valves with special blue fiber slats!
Reference: LC.44.40.1
The famous ITALKIT competition valves with 8 slats for minarelli AM6 and DERBI ! Guaranteed performance!
Reference: 27 7366.C0
MALOSSI Carbon Cutting Boards available in 0.30, 0.35 and 0.40mm. Top of the line. For manufacturing slats on a 2-stroke engine, thicknesses to choose from!
Reference: LC.12.2
High quality competition valves, aluminum base adhered!
Reference: LP.44.3
A set of 2 improved slats for motorbike with minarelli am6 engine.
Reference: 9906500
High-end valves, aluminum base with rubber bonded to the carbon plates!