- -40%

Banner
The valves POLINI are of good models, the slats are models 0,30mm in carbon high quality in order to exploit a range of power higher than the origin, less clamping the high revs ... The base is in rigid ABS, we will appreciate the stop fasteners by vix / nut, unlike the valve box without nuts or the screws will quickly turn in the vacuum ...
The box is well studied, it is in addition now delivered with a studied diffuser (called venturi by some). Stop slats are drilled and studied! Ultimately, this valve box is a very good model that can be used for the best with a carburetion of Ø17, 5mm to 24mm, and an intake pipe aligned with the diffuser. A preparation of the diffuser is strongly recommended if you pass a carburetor of more than 24mm! It is better to prepare and preserve the broadcaster than to delete it!
Spare parts :
Reference: 27 5614.C0
A premium carbon blade set, ideal for optimal adjustment.
Reference: 2013800
The high-end and ultra-efficient Viton version!
Reference: 23160.12
Valves with 6 blades for mécaboite engine DERBI. High quality guarantee with cast aluminum base and slats karbonit 0.30mm thickness.
Reference: LC.44.40.1
The famous ITALKIT competition valves with 8 slats for minarelli AM6 and DERBI ! Guaranteed performance!
Reference: 27 4235.K0
Valves that are suitable for both small and large configurations.
Reference: 440168
Ideal to increase its performance at lower cost by preserving its high quality original valve box!
Reference: 284777
Set of slats to improve your carburetion while preserving your original high quality gearbox!
Reference: LA-812-C
High-end competition valves, aluminum base with carbon slats!
Reference: 511244
Quality valve for your MINARELLI AM6, DERBI EURO 2, 3 and 4 engine.
Reference: 2718510
The best way to get MALOSSI carbon quality at the right price, and above all to choose the appropriate thickness for the maximum performance of your engine, is mounted on a VL18 valve box!
Reference: 27 7366.K0
Two 100X100mm boards in Karbonit MALOSSI available in 0.30, 0.35 and 0.40mm. It can be cut and therefore adapts to all 2-stroke motor vehicles. Choice of thickness.
Reference: LC.12.40
One of the best value for carburetor in 28 to 35mm. Reserved for connoisseurs!
Reference: 468220
Essential to maintain your valves DOPPLER ER2 on motorcycle 50cc engine Derbi.
Reference: 449776
Fiberglass slats and slat stops drilled for better performance
Reference: LC.44.35
One of the best price / quality ratio for carburetor 28 to 35mm. Reserved for connoisseurs!
Reference: 2715810.C0
The famous MHR Vl18 valves! Guaranteed performance!