Reference: 230.0016
Set of 7 reinforced POLINI clutch disks (disks + spacers + springs) APE FL, FL2, FL3, RS3, VESPA, HP, 50, 125 2T
Complete clutch with springs for VESPA and PIAGGIO APE 50 or 125 2T with 6 clutch springs.
Banner
MALOSSI secondary transmission not complete without wheel shaft or primary sprocket, it is therefore necessary to take the parts of the original transmission and mount them to the press. This transmission is ideal for starting a new car and gaining top speed on large configurations. In fact, we often arrive at the limits of the scooter (inverter and corrector of torque closed and open at bottom, engine at the bottom of its speed). ..
Thanks to the extended transmission, you will get more top speed at the same engine speed, in general there is a gain of 10 to 15km / h from 10,000 to 13,500 rpm! This transmission is only mounted on MINARELLI VERTICAL engines (list below). The teeth, contrary to the origin is straight, it is a little bit noisier but also more powerful! Less power loss!
Mounts on models from 1998 :
APRILIA SR 125 2T
APRILIA APRILIA SR 150 2T
GILERA GILERA RUNNER FX 125 2T LC
For vehicles with SECONDARY gears clutch FORCE
GILERA GILERA TYPHOON X 125 2T
ITALJET ITALJET DRAGSTER 125 2T LC
For vehicles with SECONDARY gears clutch FORCE
PIAGGIO PIAGGIO HEXAGON LX 125 2T LC
For vehicles with SECONDARY gears clutch FORCE
PIAGGIO PIAGGIO SKIPPER LX 125 2T
For vehicles with SECONDARY gears clutch FORCE
PIAGGIO PIAGGIO SKIPPER LXT 150 2T
For vehicles with SECONDARY gears clutch FORCE
Reference: 230.0016
Complete clutch with springs for VESPA and PIAGGIO APE 50 or 125 2T with 6 clutch springs.
Reference: 202.0000.occasion
Primary gear 23/64 teeth high quality POLINI for VESPA, LML 2T 125 and 150.
Reference: 67 9925
Ideal for gaining top speed on your 180cc 2T PIAGGIO engine scooter.
Reference: 5216511
Complete clutch with springs for VESPA 125cc, 150cc, 200cc 2T with 7 clutch springs.
Reference: 230.0401
A POLINI EVOLUTION clutch thrust bearing kit for VESPA 125 and 50 2T.
Reference: 6716260B
Transmission cross MALOSSI for your scooter and maxi scooter VESPA 2T.
Reference: 202.0001
Primary gear 23/64 teeth high quality POLINI for VESPA 125 T5 and 200 PE, PX 2T.
Reference: 6711486
Extended transmission, ideal with a scooter 100cc 2T already equipped with a kit, variator and pot!
Reference: 57050.21
Ideal on a prepared engine or competition, the full clutch 3 discs, hard springs 8 with plateau, working, bell ...
Reference: 249.026
POLINI SPORT clutch, ideal to start anew with more acceleration and recovery!
Reference: 4043175
Transmission brace for preparing your PIAGGIO, VESPA scooter!
Reference: 228.0010
Ideal for improving your performance on a VESPA scooter.
Reference: 187196E
Internal gear teeth of starter 14/47 teeth.
Reference: 202.0000
Primary gear 23/64 teeth high quality POLINI for VESPA, LML 2T 125 and 150.
Reference: 202.1222
Primary transmission with rigid teeth with POLINI torque damper for VESPA 125 2T!
Reference: 202.1419
Sprocket available in short and long size for VESPA 125 2T. Model in right toothing for less losses to pose with the rest of the primary in right toothing.