
Reference: 10 5397B
Cap for MALOSSI transparent PHBG tank with seal
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Banner
In order to refurbish your PHBG DELLORTO carburettor. The complete gasket set for normal PHBG carburetor and racing black edition.
The pack contains :
X1 tank cap seal Ø1.2cm
X1 aluminum threaded cover gasket
X1 cover gasket has 2 screws
X1 tank seal
X1 O-ring for wealth screw
Reference: 10 5397B
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Reference: 30 3339
A quality transparent tank with plug for PHBG and PHBD carburettor.
Reference: 09450
The replacement float for your carbs, ideal in the event of a fuel leak!
Reference: 506272
Excellent in the event of a problem or leak from your carburetor.
Reference: 09538_00
Ideal to pass your choke cable pull or to repair your PHBG!
Reference: 4224-82
A tulip which increases the venturi effect therefore the efficiency of your engine.
Reference: 09779_00
Essential part of your carburettor PHBG for better mixing oil / petrol! Not deep model for jet small step 5mm.
Reference: 213458
A necessary part for the proper functioning of your carburetor.
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.
Reference: 1297
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
Reference: 26 3991
A complete kit that will allow you to pass your cables as you wish.
Reference: 53024
The complete richness screw for your PHBG carburettors!
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: AP8106790
A tulip that increases the venturi effect therefore the performance of your engine.
Reference: 506367
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.