
Reference: 26 4189
Kit tube 40mm bent 90 ° for carburettor MALOSSI
Ideal for lost or modify the passage of your cable.
Banner
Ideal in case of loss or wear, especially since it is a very special screw, complete idle screw with spring for PHBG and PHBG racing edition carburettors. Certified high quality, genuine DELLORTO .
-External diameter of the spring: 7.20mm
-Spring internal diameter: 5mm
- Spring length: 14mm uncompressed and 6mm compressed at maximum
-Screw diameter 5mm special thread
- Full screw length: 30mm
- Thread length alone: 15mm
Reference: 26 4189
Ideal for lost or modify the passage of your cable.
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Reference: 129517
The only wealth screws for your PHBG!
Reference: AP8106790
A tulip that increases the venturi effect therefore the performance of your engine.
Reference: 506272
Excellent in the event of a problem or leak from your carburetor.
Reference: 1285
Ideal in case of leakage for a good quality repair at low price.
Reference: 9482
The replacement cover for your DELLORTO PHBG carburetors except racing black edition.
Reference: 506367
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.
Reference: 11540
Excellent in the event of a problem or a leak in your carburetor.
Reference: 493928
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 203.1504
A machined / blue anodized part POLINI for your PHBG carburettors!
Reference: 129514
For a refurbishment at a lower cost for a perfect seal.
Reference: 09811_00
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!
Reference: 1263
The tension adjuster which is placed at the end of your tubes.