
Reference: 14958_00
Plastic bushel spring sleeve for DELLORTO PHBG and PHVB carburettor
Ideal in case of loss or breakage of your old support, bushel socket.
Banner
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 2707
The idle screw without its spring for your PHBG!
Reference: 53036_00
Ideal in case of loss or change the passage of your cable.
Reference: 09450
The replacement float for your carbs, ideal in the event of a fuel leak!
Reference: 53031.78
The spare cover with screws for your DELLORTO PHBG carburettors except Racing Red and Black Edition.
Reference: 05 3733B
Ideal to increase the venturi effect so your performance.
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 4224-82
A tulip which increases the venturi effect therefore the efficiency of your engine.
Reference: 1280
Ideal for refurbishment or for loss.
Reference: 09812
A mass-machined brass cap for your carburetors with aluminum tank or racing black edition!
Reference: 16962_00
The replacement cover single screw for your carburettors DELLORTO PHBG Racing Red and Black Edition.
Reference: 506367
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.
Reference: 22 4413
Accelerator cable original type ideal for a replacement much cheaper than in concession.