
Reference: 10 5397B
Cap for MALOSSI transparent PHBG tank with seal
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Banner
Reference: 10 5397B
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Reference: 30 3339
A quality transparent tank with plug for PHBG and PHBD carburettor.
Reference: 09450
The replacement float for your carbs, ideal in the event of a fuel leak!
Reference: 506272
Excellent in the event of a problem or leak from your carburetor.
Reference: 09538_00
Ideal to pass your choke cable pull or to repair your PHBG!
Reference: 4224-82
A tulip which increases the venturi effect therefore the efficiency of your engine.
Reference: 09779_00
Essential part of your carburettor PHBG for better mixing oil / petrol! Not deep model for jet small step 5mm.
Reference: 213458
A necessary part for the proper functioning of your carburetor.
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.
Reference: 1297
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
Reference: 26 3991
A complete kit that will allow you to pass your cables as you wish.
Reference: 53024
The complete richness screw for your PHBG carburettors!
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: AP8106790
A tulip that increases the venturi effect therefore the performance of your engine.
Reference: 506367
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.