Reference: GOM-01
BARIKIT flexible sleeve pipe connection / DELLORTO carburetor, PWK, KEIHIN, OKO, FURYTECH, YSN, POLINI ... fixing Ø33 / 33mm
Pliable quality, fixing Ø33 to 36mm on each side!
Banner
MALOSSI flexible sleeve for PHBG carburettor with non-slip lip on one side. The internal diameter of the sleeve is 24mm on the pipe side and 25mm on the carburetor side, so it is ideal for Ø24 to 25.5mm male carburetors.
This model of sleeve has on one side a straight cut in Ø24mm, it is intended to pass in flexible the rigid aluminum pipes which normally accommodate a rigid phbg carburetor (pipe of 17, 19 Peugeot 103 and MBK 51 for example, or even the POLINI pipes and top performances for minarelli am6 and many others).
This sleeve is delivered alone, certified malossi (mark indicated above), an anti-slip rim is also present for the clamps on the carburetor side only. Fit this sleeve on rigid aluminum pipes, for pipes that are normally intended to accommodate a flexible carburetor, another sleeve exists.
Here is for example a perfect intake pipe to receive this flexible sleeve:
Reference: GOM-01
Pliable quality, fixing Ø33 to 36mm on each side!
Reference: 491146
Ideal for transforming the rigid assembly of its SHA carburetor into a flexible assembly!
Reference: 13300118
BIDALOT flexible sleeve for carburettor PHBG.
Reference: 293370
A quality sleeve that absorbs vibrations very well for better gas flow.
Reference: 13 4929B
Flexible upscale sleeve Ø35mm fixing each side! Special carburetor and big thrust configuration!
Reference: 223.0124
Specially designed to mount CP POLINI carburettors, can also be mounted on others like the PHBG!
Reference: 223.0123
Specifically designed to mount CP POLINI carburettors, can also be mounted on others!
Reference: GOM-03
Flexible flexible sleeve, fixing Ø31 and 34mm on each side!
Reference: 9908990
High-end flexible TPR sleeve for MIKUNI TM24 carburetor and large carburetors PHBG, PHBL ... with mounting diameter 24 to 26mm.
Reference: 10873
A good quality sleeve, ideal for mounting carburetors PHBG flexible up to 21mm on aluminum pipes provided for this purpose.
Reference: 144.480.001
Specially designed to fit PWK or KEIHIN carburettors, can also be mounted on others!
Reference: 13 4814B
An ideal carburetor / pipe connecting sleeve for large carburetors such as PHBH, PHBL, TM, ...
Reference: GOM-02
Quality flexible sleeve, fixing Ø34 to 38mm on each side!
Reference: 477451
A sleeve that absorbs vibrations while keeping the price low.
Reference: 13 6085B
Specially designed to mount flexible mounting PHBGs on a pipe intended for a rigid PHBG. Model with greater length (37mm).
Reference: GOM-04
Quality flexible sleeve, Ø35 fixing at 37mm on each side!