Banner

Spare segment for kit 50cc FURYTECH RS10 PRO NIKASIL on minarelli horizontal air scooter

Game 2 Ø40,2mm segments for kit cast iron and aluminum FURYTECH RS10 PRO 50cc on minarelli horizontal air (ovetto, neo's ...

Reference 429.0603

Ideal to give your life a high compression engine in case of loss, primer or tightening.

€13.33

Quantity

Caution requires a delay of more than 20 days

Description
Product Details

Description

Here is the set of 2 segments parts for 50cc kits NIKASIL FURYTECH RS10 RS10 PRO aluminum or cast iron. They are of good quality. Pre lapped. 50cc scooter equipped on the horizontal minarelli air like mbk ovetto, yamaha neo's ...

Product Details

Reference 429.0603

Condition New product

Pack gasket kit 50cc Ø40,2mm FURYTECH PRO RS10 cast iron and aluminum for minarelli horizontal air (ovetto, neo's ...)

A pack seal of good quality. Attention has to change your joints was reassembling for a safe and reliable installation.

€7.49

Caution requires a delay of more than 20 days

15 other products in the same category:

Set of 2 segments Ø40mm for kit font FURYTECH 50cc on minarelli horizontal air (ovetto, neos, ...)

Quick view

Reference: 429.0600

Set of 2 Ø40mm segments for kit cast FURYTECH 50cc on minarelli horizontal air (ovetto, neos, ...)

Ideal to revive your top engine in case of loss of compression, primer or tightening.

€9.99

Caution requires a delay of more than 20 days

Set of 2 Ø40 / 40.5 / 41mm segments for 50cc DR cast iron kit on PIAGGIO / GILERA Air (Typhoon, NRG...)

Quick view

Reference: SG15684

Set of 2 segments Ø40 / 40.5 / 41mm for kit 50cc DR cast on KEEWAY, PIAGGIO, Peugeot, Minarelli Vertical / Horizontal ...

Set of 2 spare segments for your kits 50cc DR iron diameter 40mm on scooter PIAGGIO GILERA &! Ideal for refurbishment or maintenance in the rules.

€15.57

Shipping in 1-3 days

Set of 2 Ø40mm segments for AIRSAL 50cc T6 aluminum kit on horizontal air minarelli (ovetto, neos, ...)

Quick view

Reference: 11131540

Set of 2 Ø40mm segments for aluminum AIRSAL T6 50cc kit on minarelli horizontal air (ovetto, neos, ...)

Ideal to revive your high engine compression in case of loss, primer or tightening.

€10.83

Shipping in 20 to 90 days depending on factory arrivals.

POLINI standard segment Ø40 X 1.26mm for 50cc kit on vertical, horizontal minarelli scooter...

Quick view

Reference: 206.0280

Standard segment POLINI Ø40 X 1,26mm for kit 50cc on scooter minarelli vertical, horizontal ...

The segment Ø40mm by thickness 1.26mm trapezoidal pin down, standard for kit 50cc POLINI on minarelli vertical, horizontal ...

€13.33

Shipping in 1-3 days

Set of 2 segments Ø40 X 1,2mm for kit cast iron and aluminium TEKNIX, CGN 50cc on scooter minarelli vertical, horizontal…

Quick view

Reference: 247015

Set of 2 segments Ø40 X 1,2mm for kit cast iron and aluminum TEKNIX, CGN scooter 50cc on minarelli vertical, horizontal ...

Ideal to maintain and repair its 50cc kit in case of loss of compression, heating .... Thickness 1.2 mm.

€4.16

Home in 2 to 5 days

Segment standard POLINI Ø40 X 1,26mm pour kit 50cc sur scooter minarelli vertical, horizontal...

Quick view

Reference: 206.0281

POLINI chrome segment Ø40 X 1.26mm for 50cc kit on vertical, horizontal minarelli scooter ...

The Ø40mm segment in chromed steel by 1.26mm trapezoidal thickness lug down, standard for 50cc POLINI kit on vertical, horizontal minarelli ...

€21.66

Shipping in 1-3 days

Set of 2 segments Ø40 / 40.5 mm for kit 50cc TOP PERFORMANCES cast on Keeway, CPI, ...

Quick view

Reference: 9910380

Set of 2 segments Ø40 / 40,5mm for kit 50cc TOP PERFORMANCES on KEEWAY, PIAGGIO, Peugeot, Minarelli Vertical / Horizontal ...

Ideal to refurbish your kit 50cc TOP PERFORMANCES on scooter Keeway, CPI, Peugeot Buxy, Yamaha Minarelli Vertical & Horizontal ... 50cc 2 stroke.

€66.66

Shipping in 1-3 days

Set of 2 segments Ø40 X 1,5mm for kit cast iron and aluminium TEKNIX, CGN 50cc on scooter minarelli vertical, horizontal…

Quick view

Reference: 247007

Set of 2 segments Ø40 X 1,5mm for kit cast iron and aluminum TEKNIX, CGN scooter 50cc on minarelli vertical, horizontal ...

Ideal to maintain and repair its 50cc kit in case of loss of compression, heating .... Thickness 1.5mm.

€5.83

Shipping in 1-3 days

Set of 2 Ø40mm segments for CARENZI cast iron 50cc kit on KEEWAY, PIAGGIO , Peugeot, Minarelli Vertical / Horizontal...

Quick view

Reference: 060005

Set of 2 segments Ø40mm for kit 50cc CARENZI, TNT cast on KEEWAY, PIAGGIO, Peugeot, Minarelli Vertical / Horizontal ...

Spare parts, chrome model for high 50cc cast iron motor in diameter 40mm, ideal in case of loss of compression.

€11.66

Requires a delay of more than 20 days!

-50% Promo

Set of 2 segments Ø40 X 1.5mm for MALOSSI 50cc cast iron kit on vertical, horizontal minarelli scooter...

Quick view

Reference: 35 1981.40

Set of 2 Ø40 X 1.5mm segments for MALOSSI 50cc cast iron kit on vertical, horizontal minarelli scooter ...

Ideal for maintaining and repairing its 50cc MALOSSI cast iron kit in the event of loss of compression, heating, etc. Thickness 1.5 mm.

€16.66 €33.33

Shipping in 1-3 days

Set of 2 segments AIRSAL Luxe Ø40mm for kit 50cc AIRSAL luxe cast minarelli horizontal air (ovetto, neos, ...)

Quick view

Reference: H11138340

Set of 2 segments AIRSAL Luxe Ø40mm for kit 50cc AIRSAL luxury cast iron minarelli horizontal air (ovetto, neos, ...)

Upscale segments for piston AIRSAL Luxury Ø 40mm.

€11.66

Shipping in 20 to 90 days depending on factory arrivals.

Set of 2 Ø40mm segments for AIRSAL 50cc aluminum kit on horizontal air minarelli (ovetto, neos, ...)

Quick view

Reference: 11130940

Set of 2 Ø40mm segments for aluminum AIRSAL kit 50cc on minarelli horizontal air (ovetto, neos, ...)

Ideal for maintaining your kits 50cc scooter 50cc with AIRSAL on minarelli horizontal air.

€11.66

Shipping in 20 to 90 days depending on factory arrivals.

Set of 2 Ø40mm segments for OLYMPIA 50cc cast iron kit on vertical minarelli (booster, bw's)

Quick view

Reference: 479538

Set of 2 Ø40mm segments for kit cast, TEKNIX, OLYMPIA 50cc on minarelli vertical, horizontal, CPI / Keeway ...

Ideal to revive your high engine compression in case of loss, primer or tightening.

€16.66

Attention, may require a delay of more than 20 days!

Segment Ø40 X 1mm for kit 50cc DOPPLER aluminium 103/Fox/Booster rocket/Trekker/buxy…

Quick view

Reference: 193223

Segment Ø40 X 1mm for kit 50cc DOPPLER aluminum 103 / Fox / Booster / Trekker / buxy ...

Ideal for the maintenance of your Ø40mm DOPPLER aluminum cylinder.

€15.83

Shipping in 1-3 days

Set of 2 segments Ø40 X 1.2mm for DOPPLER S1F 50cc cast iron kit on vertical, horizontal minarelli scooter...

Quick view

Reference: 192807

Set of 2 segments Ø40 X 1,2mm for kit cast iron DOPPLER S1F 50cc on vertical scooter minarelli, horizontal ...

Essential for maintaining your iron cylinder 50cc DOPPLER Ø40mm.

€10.83

Attention, may require a delay of more than 20 days!