
Reference: 13635
Replacement original type ignition rotor for original ignition on MBK 51 / motobecane av10
Ideal in case of breakage, wear or breakdown ... on your original ignition!
Banner
Ideal for those who are fed up with ignition problems. Ideal in case of wear of your ignition. Here is the rotor + stator P2R original type MORIYAMA for MBK AV10 electronic 12 volts. This high-end rotor + stator will not make you gain power because it is really identical to the original.
Ignition timing advice :
On AV7 engine : 1.6mm (engine prepared for high revs), 1.8mm (engine prepared for medium revs) to 2mm (original engine)
On AV10 engine with reed valves : 1.5mm (original or unprepared engine), 1.4mm (medium speed prepared engine), 1.3mm (high speed engine).
Timing recommended with the strobe light . Or to the comparator .
*Attention, the higher the advance and the compression rate, the more careful you have to be to have a high octane in the fuel, and not put too much oil in order not to lower this rate!
Reference: 13635
Ideal in case of breakage, wear or breakdown ... on your original ignition!
Reference: 14100114
Ideal for refurbishing your BIDALOT Factory Racing ignition.
Reference: RT01DD
Ideal to refresh your ignition MVT Internal Rotor with lighting.
Reference: 185006
Ideal in case of wear of your ignition to repair your machine at a lower cost.