
Reference: S410000304002
Clips, piston pin rushes ATHENA in Ø of axis 12mm Type G d.1mm
The ATHENA clips of good quality for 12mm axles with 1mm diameter piston groove!
Banner
Here is the special mono segment replacement piston for the 60cc Ø42mm ATHENA Racing kit on MINARELLI P4, P6 .... It is a very high quality METEOR model piston, it is equipped with a thin chrome L-shaped segment Ø42mm and 2 openings at the back for blind cylinder transfers!
The piston is obviously complete and delivered with 12mm axle, reinforced G clips and its L segment.
Attention to the good choice of the dimension of wear from B to F before adding to the basket.
Reference: S410000304002
The ATHENA clips of good quality for 12mm axles with 1mm diameter piston groove!
Reference: 004416/R
Premium segment for the maintenance of your 60cc kit 42mm diameter and increase your engine compression!
Reference: 062002435
Spare piston els 65cc AIRSAL Ø43,5mm kits SACHS.
Reference: 3620 (2113)
The piston Ø39mm replacement for old mopeds engine MINARELLI P4, P6 ...
Reference: 42115.02
The replacement piston by VERTEX for kits 70cc Ø44mm PARMAKIT aluminum for KREIDLER FLORET HP 5.2.
Reference: S4C04800004A
The ATHENA replacement piston for Ø48mm kits for Sachs CORSA LUNGA 50 14mm axle.
Reference: 060306435
Spare piston for kits 65cc AIRSAL Ø43,5mm aluminum engine MORINI M1, M101, M1ES 50, M1K.
Reference: P-281-B
Flat head piston for minarelli P6, available in 38.8 / 39 / 39.5 and 40mm.
Reference: 204.0004/A
Ideal to maintain your kit POLINI on SACHS in race 44mm.
Reference: P-380-A
BARIKIT bi-segment piston for CASAL 50 with 4-speed engine.
Reference: 85210.02
Spare piston for 70cc kit on ZUNDAPP SUPERTERM LAMELLARE CS50, KS50 ...
Reference: 85120.02A
Spare piston kit for 70 ° on ZUNDAPP cc liquid cooled!
Reference: 64156.02A
The PARMAKIT replacement piston kits for Ø48mm SACHS RS 503, 504 long race.
Reference: 204.0601/A
Ideal for maintaining your POLINI kit on minarelli P4 or P6 42mm stroke.
Reference: 64400.02
The spare piston PARMAKIT for the kits Ø40mm on SACHS RS 503, 504 short stroke.
Reference: 64151.02A
The PARMAKIT replacement piston by VERTEX for Ø48mm kits on MINARELLI P6.
Reference: 85306.02
The PARMAKIT replacement piston by VERTEX for Ø45mm kits on ZUNDAPP SUPERTERM, CS50, KS50.
Reference: P-383-A
BARIKIT bi-segment piston for CASAL 50 with 5-speed engine.