
Reference: 35 7259
Set of 2 segments chrome for kit MALOSSI aluminum 70cc Ø47mm
Ideal in case of loss of compression and to put your high engine to nine.
Banner
For more performance and solidity on vertical minarelli, one of the solutions is to put a kit with piston in axis of 12mm, of course you will need the crankshaft for axis of 12mm appropriate. The piston d.47mm 12mm MHR axis for the 70cc aluminum MHR kit with bar for vertical minarelli and the MALOSSI MHR replica kit only . This piston is also the replacement model for MALOSSI MHR REPLICA phase 1 Ø47mm kits on minarelli am6. Excellent quality, treated, 2 thin hard chrome domed segments… a must have for vertical, in addition, it has side grease nipples! Supplied with 12mm axle, piston ring and clips in G.
Select your lettering A / B / C / D according to the wear of your kit, the lower the letter, the lower the piston has a rating.
Example :
A for kit which has from 0 to 5000km
B for kit which has from 5000 to 9000km
VS…
D ...
Reference: 35 7259
Ideal in case of loss of compression and to put your high engine to nine.
Reference: 36 4450
Do not forget to change at each winding to prevent engine failure thereafter.
Reference: 2311783B
Piston pin with shaped clips "C", essential for refurbishment quality and reliable.
Reference: PT150
Complete replacement piston for your minarelli am6 high engine.
Reference: 229.0591
A good quality piston and finish changing every 5,000 to 6,000 km maximum for peak performance.
Reference: 992414B
Top of the range TOP PERFORMANCES RACING TPR replacement piston for minarelli am6.
Reference: 3411695.A0
Complete high-end piston for MALOSSI 80cc Ø50mm kit on AM6 & DERBI.
Reference: 06301050
A high quality VERTEX replacement piston to be changed every 7,000 km.
Reference: PI.44.480A.V
Piston mono segment complete spare graphite, top model home VERTEX for kit high 75 and 80cc with 90mm rod on am6.
Reference: P-469-1SA
Full spare piston kit 80cc Ø50 mm aluminum BARIKIT Racing on minarelli am6.
Reference: 06134950
Complete quality piston kit 80cc minarelli am6.
Reference: S4C05000003A
Complete ATHENA spare piston for kit 80cc Ø50mm ATHENA Aluminum.
Reference: PI.02.47A.M
Quality Piston for your 70 HEBO kit
Reference: S410480308002
Ideal for the maintenance of your 70cc ATHENA RACING kit!
Reference: 082002.A
Ideal for the maintenance of your 70cc Ø47,6mm ATHENA RACING kit!
Reference: PI.63.490.M
Piston complete bi segment of high-end replacement for high engine am6 kit.
Reference: PI.44.52A.14
Spare piston of excellent quality for kit ITALKIT 95cc Ø52mm minarelli am6.
Reference: 06133348
Quality piston kit for your 70 AIRSAL.