Reference: 487209
TUN 'R intake pipe for 30mm carburettor (Ø30mm fixation) on minarelli am6 and derbi euro 1, 2 and 3 engines
A good quality pipe with an almost perfect finish for a price more than affordable!
Banner
Here is the admission pipe POLINI Oriental evolution for MINARELLI AM6 engine mecaboite! She also climbs on some DERBI if desired, and on specific engines like PEUGEOT 103 SPX with carters MALOSSI, MBK 51 with EUROCILINDRO carters or with carters POLINI and adaptor RRD.
This pipe is really on top, first of all you guide it as you wish to place the carburettor as you want! Its position is intended for PHBG or other model carburetors and its internal diameter is provided for carburetors of 15 to 21mm. Its fixation diameter is Ø23 to 25mm. To avoid harmful vibrations and cuts, the sleeve is in specific glass.
Hard enough for the pipe to crack and not break during the clamping. Even on the aesthetic side you feel that POLINI really treated this room to the maximum. Needless to put a joint, a joint is pre-integrated to the junction, plus it is delivered with notice, visserie.. Clearly, thanks to perfect diffusion, vibration absorption, good position.. The performance gain will be well present and felt!
-For carburettor DELLORTO PHBG, carburetors type PHBG... and other models 19 to 21mm.
-For carburetors POLINI CP from 15 to 21mm.
-Fixing of carburettor Ø23 to 25mm.
-Internal diameter 21 to 24mm.
-tilt angle 43° and length 68mm
-Orientable 360°
A= Ø25mm
B= 21
C= 43°
Mounting on:
APRILIA: AF1 50 MINARELLI AM6 - MX 50 Minarelli AM6 - RS 50 MINARELLI AM6 - RX 50 MINARELLI AM6 - TUONO 50 Minarelli AM6
MINARELLI: AM3 - AM4 - AM5 - AM6
SALE: BAJA 50 Minarelli AM6 Euro4/5 - DERAPAGE 50 Minarelli AM6 Euro4/5
FANTIC MOTOR: CABALLERO 05 Minarelli AM6
HM: CRE 50 SIX 2003/2005 Minarelli AM6 - DERAPAGE 50 2001/02 Minarelli AM6 - DERAPAGE 50 2003/05 Minarelli AM6
MALAGUTI: DRAKON 50 - XSM 50 Minarelli AM6 - XTM 50 Minarelli AM6
YAMAHADT 50 R MINARELLI AM6 - DT 50 SM MINARELLI AM6 - TZR 50 MINARELLI AM6
SHERCO: HRD ENDURO MINARELLI AM6 - HRD SM MINARELLI AM6
RIEJU: MRT, MRX MINARELLI AM6 - SMX MINARELLI AM6 - SPIKE MINARELLI 2006
BETA: RR 50 AM6 (1999-2002) - RR 50 ENDURO, MOTARD 50 ALU AM6 2003 - RR 50 SM AM6 (2002-2004)
MBK: X-LIMIT 50 Minarelli AM6 - X-POWER 50 Minarelli AM6
PEUGEOT: XPS 50 SM MINARELLI AM6 - XPS 50 T MINARELLI AM6 - XR6 50 MINARELLI AM6
Reference: 487209
A good quality pipe with an almost perfect finish for a price more than affordable!
Reference: 9929240
Replacement for TPR orientable intake pipes with MIKUNI TM 24 and OKO 28 carburettor on mécaboite Minarelli AM6 and DERBI.
Reference: TUB-04
Special intake pipe for large diameter carburetors from 26 to 28mm like OKO ... 360 ° swiveling and ideal for large configurations.
Reference: 075705
A very well designed intake pipe, ideal for accompanying a high engine configuration.
Reference: 215.0462
For an improved admission and a good performance gain! Orientable 360° with tilt angle at 43° more pronounced than normal!
Reference: 2013801
A very high-end special for large carburations on MINARELLI AM6, DERBI ...
Reference: 9906940
Ideal to accompany the carburetors 19 to 21mm on your mécaboite minarelli am6.
Reference: CL01
A competition model that will allow you to greatly improve the performance of your AM6.
Reference: LC.44.400
The must of the admission kits for large configuration with carburetor in 28 to 35mm. Reserved for connoisseurs! Hyper short, super diffusion, carburetor up to 35mm, vibration scrub ... Simply the best.
Reference: 215.0439
Special intake pipe for POLINI CP 23 and 24mm carburetors. 360 ° swivel with 40 ° tilt angle.
Reference: 9931740
TPR intake kit, 360 ° swivel, flexible assembly specially designed to accompany an OKO, PWK POLINI, FURYTECH, KEIHIN ... 24 to 28mm carburetor on AM6 & DERBI Ø34mm mounting.
Reference: 9919270
Pipe replacement inlet diameter 24mm carburettor MIKUNI TM24 or other flexible mount models.
Reference: 10870
A pipe with a correct finish which will allow you to mount your carburetors from 19 to 26mm.
Reference: LC.44.35
One of the best price / quality ratio for carburetor 28 to 35mm. Reserved for connoisseurs!
Reference: 1773
A quality 360 ° swivel pipe to replace the old one Supplied with two 30 and 45 ° sleeves!
Reference: 53405.05
Pipe of admission ideal to accompany a carburetor 17.5mm to 21mm!