- New
Reference: 144.405.003
ULTRA RACING valves for POLINI MBK 51 / PEUGEOT 103 housings Incorporated support
HYPER RACING valves with diffuser, bonded, single-leaf for POLINI 103, 51, MINICROSS POLINI, APE ...
Banner
The intake pipe C. BOUCHET printed in 3D in a specific material for good holding in time. This pipe must be mounted with caution, with a torque of 4.5 NM with a dynamometer tool and mounted with joint paste ATHENA ATHESIL!
This pipe designed by a motorist for performance, has a diffuser entering the valves to improve the intake! It is cubited so as to take the carburation to the side of the machine. It comes with a soft sleeve and collars, as well as its screws.
Even if the diameter is not optimal, the pipe can also receive the PWK 21mm!
This intake pipe is made to mount the PWK carburettors and DELLORTO VHST 24 to 28mm flexible mounting on:
MBK 51 / AV10 MOTOR with housings POLINI
PEUGEOT 103 with housings POLINI incorporated media
*Warning, don't get on crankcases POLINI without incorporated supports of PEUGEOT 103!!!
**Be careful, do not mount with a kick box on the MBK 51, and prevent the side hoods from resting!
Reference: 144.405.003
HYPER RACING valves with diffuser, bonded, single-leaf for POLINI 103, 51, MINICROSS POLINI, APE ...
Reference: 02 1690B
An intake pipe adapted for a carburettor of 15mm or 16mm SHA on PEUGEOT 103!
Reference: 1399
Ideal in case of breakage or wear of your old part.
Reference: pipe CBE 90° 103 carters malossi 21mm
3D printed EPC pipe for housings MALOSSI on 103, EUROCILINDRO on MBK 51...
Reference: 365641
A shorter pipe for better venturi effect. This pipe is the highest end of the market. It will be perfect with a carburetor 19 to 21mm.
Reference: 02 6487B
The best to accompany a 15 or 16mm SHA carburetor on your 103!
Reference: 215.0227
High quality intake pipe for mounting PHBG carburetors from 17.5 to 21mm.
Reference: pipe_coudée_carter_polini_cbe_PHBG
Pipe POLINI flexible 21mm for mopeds with crankcases POLINI!
Reference: 02 2083B
The top of the intake pipe to put your PHBG 17.5mm to 21mm on your 103.
Reference: 02 5035B
The best to repair or modify the size of your MALOSSI valve boxes on your PEUGEOT 103 or MBK 51.
Reference: CAL02RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on PEUGEOT 103 engine with POLINI housings, with built-in brackets.
Reference: 144.270.001
Flexible polini pipe 21mm for mini-moto and cross 2T POLINI, or mounting on POLINI crankcases with PEUGEOT 103 and MBK 51 supports!
Reference: 1400
An amazing pipe with a very good finish that will agree very well with a carburetor 18 to 21mm.
Reference: 516867
A shorter pipe for a better venturi effect. It will be perfect with a 19 to 21mm carburettor.
Reference: pipe_droite_carter_polini_cbe_PHBG
Pipe POLINI flexible 21mm for mopeds with crankcases POLINI!
Reference: 02 6238B
A pipe specially designed for MALOSSI housings. It is very short with good diffusion, micro-blasted and with horizontal bars to avoid any gas rebounds. Clearly a very well worked pipe which will be accompanied by a VL6 valve box or other AM6 valve and a 21mm carburetor.