Flexible adjustable MALOSSI intake pipe, at 90° Ø28 to 32mm center distance AM6 / DERBI ( PEUGEOT 103, MBK 51...)

Reference: 02 6489B

Pipe of admission MALOSSI Ø20mm by 23mm (PHBG) flexible label Peugeot 103 spx, rcx, clip, mvx, vogue

A pipe specially designed for flexible assemblies. This pipe was specially created for the competition. It is therefore mounted with a flexible PHBG carburetor from 15 to 21mm.

Reference: 215.0225

POLINI intake pipe Ø19mm by 24mm (PHBG) peugeot 103 sp, mv, mvl, lm ...

Very good POLINI intake pipe for fitting 17.5 to 21mm PHBG carburettors.

Reference: PIPE-MAL-21

Intake pipe C. BOUCHET 90° Ø19 to 21mm interax DERBI, PEUGEOT 103, MBK 51, crankcases MALOSSI, EUROCILINDRO

3D printed EPC pipe for housings MALOSSI on 103, EUROCILINDRO on MBK 51...

Reference: 56251.05

Intake pipe PARMAKIT Ø19mm by 24mm (PHBG) Peugeot 103 spx / rcx / clip / mvx finned

Ideal with a carburettor PHBG 19 to 24mm and achieve maximum performance! Model "finned" for mob Peugeot 103 SPX, RCX ...

Reference: 02 5038B

Straight pipe Ø15 or 19mm for MALOSSI valve box on MBK 51 / Peugeot 103

The best to repair or modify the size of your MALOSSI valve boxes on your PEUGEOT 103 or MBK 51.

Reference: PIPE-POL-28-D

C-knit pipe. 24mm flexible BOUCHET at 28mm PWK / VHST for PEUGEOT 103 and MBK 51 with crankcases POLINI

Pipe POLINI flexible 24-28mm for mopeds with crankcases POLINI!

Reference: 02 6488B

Pipe of admission MALOSSI Ø20mm by 24mm (PHBG) Peugeot 103 spx / rcx / clip / mvx

A pipe that mounts very well with a PHBG from 17.5 to 21mm. This pipe is corrected and revised for better distribution.

Reference: 215.0370

Intake pipe for POLINI housings incorporated support on Peugeot 103 (Ø 15 or 19mm with the choices)

Intake pipe for POLINI support housings incorporated on PEUGEOT 103.

Reference: 1399

Pipe of admission CGN Ø15mm by 19mm (SHA) Peugeot 103 sp, mv, mvl, lm ...

Ideal in case of breakage or wear of your old part.

Reference: PIPE-MAL-28

Inlet pipe C. BOUCHET 90° Ø28 to 32mm interax DERBI, PEUGEOT 103, MBK 51, crankcases MALOSSI, EUROCILINDRO

3D printed EPC pipe for housings MALOSSI on 103, EUROCILINDRO on MBK 51...

Reference: 215.0330

Inlet pipe for POLINI casings without support incorporated on Peugeot 103 (Ø 15 or 19mm with the choices)

Reference: 365641

Pipe of admission DOPPLER ER2 Ø20mm (PHBG) flexible with sleeve for Peugeot 103

A shorter pipe for better venturi effect. This pipe is the highest end of the market. It will be perfect with a carburetor 19 to 21mm.

Reference: 02 6238B

Intake pipe for MALOSSI Ø20.8 by 24mm housings (PHBG) for all 103

A pipe specially designed for MALOSSI housings. It is very short with good diffusion, micro-blasted and with horizontal bars to avoid any gas rebounds. Clearly a very well worked pipe which will be accompanied by a VL6 valve box or other AM6 valve and a 21mm carburetor.

Reference: 02 2083B

Pipe of admission MALOSSI Ø19mm by 24mm (PHBG) Peugeot 103 sp, mv, mvl, lm ... finned

The top of the intake pipe to put your PHBG 17.5mm to 21mm on your 103.

Reference: PIPE-POL-21-D

C. BOUCHET flexible pipe 19 to 21mm for PEUGEOT 103 and MBK 51 with crankcases POLINI

Pipe POLINI flexible 21mm for mopeds with crankcases POLINI!

Reference: 215.0226

POLINI intake pipe Ø15mm by 19mm (SHA) peugeot 103 SPX, RCX, CLIP, MVX

Intake pipe ideal for fitting SHA 15 or 16mm carburettors.