
Reference: 247766
Inlet valves DOPPLER ER2 fiberglass for casings origin peugeot 103
Valves mounted in mono-lamelle fiberglass for your 103.
Banner
Ideal for mounting your flexible carburetors from 19 to 21mm, the intake pipe is the more upscale market for Peugeot 103, it is extremely short and well venturisée / studied.
It has a machining (label type) to set a flexible sleeve, the latter is also included with this pipe, and 2 clamps, you can install your carburetor 19 has 21mm flexible mounting (mounting diameter the sleeve 21 is 25mm).
DOPPLER logos are registered on each side of the pipe, remember that the flexible mounting avoids the emulsion of gas, vibrations and jolts in the carburetor, the assembly therefore do well improve performance!
Reference: 247766
Valves mounted in mono-lamelle fiberglass for your 103.
Reference: 365117
Valves mounted in mono-slat carbon 0.35mm for your 103!
Reference: 293370
A quality sleeve that absorbs vibrations very well for better gas flow.
Reference: 516867
A shorter pipe for a better venturi effect. It will be perfect with a 19 to 21mm carburettor.
Reference: 215.0308
The replacement pipe for valves boxes POLINI on PEUGEOT 103 SP, MV, LM ...
Reference: 144.270.001
Flexible polini pipe 21mm for mini-moto and cross 2T POLINI, or mounting on POLINI crankcases with PEUGEOT 103 and MBK 51 supports!
Reference: 1399
Ideal in case of breakage or wear of your old part.
Reference: pack_pipe_malossi_AM6_DERBI_90°
MALOSSI pipe for adaptation on PEUGEOT 103 / MBK 51 requiring an angled admission! Center distance am6 / DERBI
Reference: 496075
Ideal in case of breakage or wear your old room.
Reference: 215.0227
High quality intake pipe for mounting PHBG carburetors from 17.5 to 21mm.
Reference: 02 6487B
The best to accompany a 15 or 16mm SHA carburetor on your 103!
Reference: PIPE-POL-28-D
Pipe POLINI flexible 24-28mm for mopeds with crankcases POLINI!
Reference: PIPE-POL-21-DC
Pipe POLINI flexible 21mm for mopeds with crankcases POLINI!
Reference: 56251.05
Ideal with a carburettor PHBG 19 to 24mm and achieve maximum performance! Model "finned" for mob Peugeot 103 SPX, RCX ...
Reference: 215.0225
Very good POLINI intake pipe for fitting 17.5 to 21mm PHBG carburettors.
Reference: 215.0370
Intake pipe for POLINI support housings incorporated on PEUGEOT 103.
Reference: 1400
An amazing pipe with a very good finish that will agree very well with a carburetor 18 to 21mm.
Reference: 365641
A shorter pipe for better venturi effect. This pipe is the highest end of the market. It will be perfect with a carburetor 19 to 21mm.