
Reference: 215.0330
Inlet pipe for POLINI casings without support incorporated on Peugeot 103 (Ø 15 or 19mm with the choices)
Banner
Here is the MALOSSI pipe of 20mm for Peugeot 103 SPX / RCX / MVX and CLIP, also arises on VOGUE which require a fairly long assembly. This intake pipe is a model specially designed for flexible mounting. It is a label version because it is specially machined and was used for group 1 (with PHBG 15mm) and 2 (with PHBG 19mm) competitions.
The fixing diameter is therefore 23mm, you can put a flexible sleeve there with a flexible PHBG carburetor with a diameter of 19 to 21mm recommended (malossi also mounted the 15mm with this pipe). The finish is good, it is worked at the level of the duct to obtain a good venturi effect. It has a lateral location for the installation of a lung or other after making a thread.
Reference: 516867
A shorter pipe for a better venturi effect. It will be perfect with a 19 to 21mm carburettor.
Reference: 215.0308
The replacement pipe for valves boxes POLINI on PEUGEOT 103 SP, MV, LM ...
Reference: 144.270.001
Flexible polini pipe 21mm for mini-moto and cross 2T POLINI, or mounting on POLINI crankcases with PEUGEOT 103 and MBK 51 supports!
Reference: 1399
Ideal in case of breakage or wear of your old part.
Reference: pack_pipe_malossi_AM6_DERBI_90°
MALOSSI pipe for adaptation on PEUGEOT 103 / MBK 51 requiring an angled admission! Center distance am6 / DERBI
Reference: 496075
Ideal in case of breakage or wear your old room.
Reference: 215.0227
High quality intake pipe for mounting PHBG carburetors from 17.5 to 21mm.
Reference: 02 6487B
The best to accompany a 15 or 16mm SHA carburetor on your 103!
Reference: PIPE-POL-28-D
Pipe POLINI flexible 24-28mm for mopeds with crankcases POLINI!
Reference: PIPE-POL-21-DC
Pipe POLINI flexible 21mm for mopeds with crankcases POLINI!
Reference: 56251.05
Ideal with a carburettor PHBG 19 to 24mm and achieve maximum performance! Model "finned" for mob Peugeot 103 SPX, RCX ...
Reference: 215.0225
Very good POLINI intake pipe for fitting 17.5 to 21mm PHBG carburettors.
Reference: 215.0370
Intake pipe for POLINI support housings incorporated on PEUGEOT 103.
Reference: 1400
An amazing pipe with a very good finish that will agree very well with a carburetor 18 to 21mm.
Reference: 365641
A shorter pipe for better venturi effect. This pipe is the highest end of the market. It will be perfect with a carburetor 19 to 21mm.