
Reference: 090591F
CARENZI reinforced clutch holder for minarelli am6 colour choice
Reinforced element for clutch support, allows better cable retention
Banner
Here is the assortment of 300 TNT circlips for all your repairs, mechanical sessions. An essential box in any workshop to always have these small parts difficult to find and fragile after several disassembly, reassembly. Ideal for scooter, motorbike, mob, car ... Very practical storage box, clips classified by size.
Inch and mm sizes available in this kit:
Namely that an inch measures 25.4mm.
-X20 1/8 "= 3.175mm
-X25 1/4 "= 6.35mm
-X15 13/16 "= 20.63mm
-X15 1-1 / 16 "= 29.58 mm
-X15 7/16 "= 11.11mm
-X15 9/16 "= 14.28mm
-X10 5/32 "= 3.96mm
-X15 5/16 "= 7.93mm
-X20 7/8 "= 22.22mm
-X10 1-1 / 8 "= 28.57 mm
-X15 15/32 "= 11.90mm
-X20 5/8 "= 15.87mm
-X15 3/16 "= 4.76mm
-X20 3/8 "= 9.52mm
-X15 1 "= 25.40mm
-X5 1-1 / 4 "= 31.75mm
-X25 1/2 "= 12.70mm
-X25 3/4 "= 19.05mm
Reference: 090591F
Reinforced element for clutch support, allows better cable retention
Reference: AM00026
High quality replacement part TOP PERFORMANCES, essential to have the signal on the position of the neutral position on your mécaboite driving minarelli am6.
Reference: 11400
Quality part, ideal in case of breakage or wear of your old original cap on AM6 engine.
Reference: 32174
Ideal in case of pronounced wear of your old part! Good quality and especially much cheaper than the origin in concession.
Reference: AM00013
A high quality gear, ideal for changing your 4th gear on the output shaft.
Reference: 32186
A pinion original type of kick axis and cheaper than in concession. Ideal for refurbishment of your engine down!
Reference: 32187
Indispensable for the proper functioning of your kick starter mechanism.
Reference: AM00006
A high quality gear, ideal for changing your second report on the input shaft.
Reference: AM00014
A high quality gear, ideal to change your 5th gear on the output shaft.
Reference: 504842
A box of complete circlips which will allow you to make all your repairs, changes. Clips for pinion, gearbox, toe-clip, variator, ...
Reference: AM00037
Gearbox shaft for your Minarelli AM6 2nd series engine.
Reference: AM00005
Quality part, ideal in case of breakage or wear of your old original cap.
Reference: 466801
An axis of the original type and less expensive than in concession.
Reference: 146909
Ideal for the refurbishment of your minarelli am6 gearbox. Allows the axle to be mounted on a bearing!
Reference: AM00010
A high quality gear, ideal to change your first report on the output shaft.
Reference: 32189
An original type spring of very good quality and much cheaper than the original in concession. In addition to this, you need to know more about it.