Here's the Stage6 engine pack and let yourself be seduced by its performance and reliability: cylinder kit, crankshaft and exhaust chamber Stage6 StreetRace 88 race 45mm / 90mm wire for the Derbi Euro 2 (Derbi EBE050 engine before 2006). This set of parts guarantees maximum performance without having to think about the different parts to combine.
Pack 88 Derbi cast iron containing the following parts:
1x Cylinder 88 cc d.50mm of cast iron, 5 transfers and an oval exhaust outlet,
1x Piston complete bi-segments d.50 mm,
1x High compression aluminium monobloc,
1x Joint pouch (base and cap),
1x Vilebrequin Stage6 HPC race 45 mm, 90mm rod and aig cage. 12x17x15mm,
1x Pair of bearings and seals spy Stage6 SKF 6204 C3 steel cage,
1x Stage6 Streetrace black AM6 and Derbi exhaust pot,
Screws.
Some features:
Engine capacity: 88cc
Approval: No
Piston axis: 12 mm
Materials cylinder: Font
Alse: 50 mm
Race: 45 mm
Rod length: Origin
The 88 Stage 6 StreetRace kit is made of cast iron and perfectly combines reliability and performance. There's plenty to accompany you every day on a motorcycle.
To make the most of the 88 Derbi engine pack before 2006 and thus make the most of its performance, we recommend that you combine it at least with: a 26 mm PWK type carburettor; a valve box such as Stage6 Viton; a reinforced clutch and why not an internal rotor ignition such as the MVT Digital Direct.
This combination of parts will be optimal for daily use of your motorcycle 50 such as the Derbi Senda.
Additional data from 88 Street Race Derbi before 2006:
The outer mould is based on a replica of the original cylinder and has an annotation of 49cm3. But we want to reassure you, it is a 88 cc.
For mounting 88cc on 90mm rod It is imperative to use longer studs (M7x120mm),
A milling for the passage of the rod is necessary, we recommend that you make a blank installation to clearly visualize the passage of the rod (see notice),
The assembly of the cylinder kit is very simple and does not require any milling of the engine housing.
As far as running is concerned, a minimum of 300 km with a mixture of 3% oil will guarantee robustness and durability.
You can easily reach the 20 horses with excellent reliability.
Kit cylinder Derbi Euro2 NOT approved!
