Reference: VM.60.1
Set of 4 ITALKIT reinforced clutch springs for minarelli am6
Quality springs for your minarelli am6 equipped engines.
Banner
A 100% complete racing package for minarelli am6 engine! Special racing 44 with vilo ultra reinforced, kit 80cc Ø48mm exhaust 32mm, bearings celerons, springs of clutch, dowels .... A pack perfectly designed to be assembled together for maximum performance!
Not approved on road open only for competition on the track, road closed.
New in 2014 is the tone: the highest crankshaft range Mazzuchelli (like MHR BIG Bore) with rod forged and litters of Ø20mm, cage 12x17x15, high-quality steels, balancing the dynamic top, excellent diagrams, stud bolt entering , an excellent compression ratio, cooling studied with a semi-closed type cylinder, 32mm diameter exhaust with boosters, specifically tailored skirt, 6 admission with transfer form studied, bearing Celerons, 44,00 race with Ø48mm diameter piston , Vertex piston graphite ....
Competition has only to behave themselves and is far behind the most-hand maxi kits. Only downside of this pack, the absence of a connecting rod 90 mm! A novelty of the great Spanish brand ITALKIT and finally available to us, this ultra complete 80cc engine pack mounts on mécaboite Minarelli AM6. This set will give you all the power sought to distinguish when you compete and win first place.
As usual, the ITALKIT brand is no exception to the rule in the pack of current best parts on the market. The aluminum alloy cylinder has a specific heat treatment and internal coating niquel / silica, giving it its strength and reliability, foolproof! Featuring no less than 9 lights including 6 transfers admission, 2 boosters worked to shape and finally the impressive exhaust outlet by its shape and size to the point that the outlet diameter has been revised upward and measure no less than Ø32mm (an exhaust ring is provided for passing a Ø28mm diameter exhaust).
That's not all, Cooling also been completely revised and corrected in order to provide the best possible heat exchange and at the same time to get a performance gain consequently indeed less engine runs out of steam and heat and performance remain present. to accompany this cylinder, a racing stud bolt! Top model, specially designed to provide maximum compression. The breech block is used and mounted on O-ring, the combustion chamber is frustoconical in shape and has a very successful polished, smooth and clean.
The Ø48mm piston meanwhile is not chosen at random, it is a single segment model in VERTEX treatment with graphite. Suffice to say the material of the highest quality whose reputation / quality is second to none. The piston is equipped with a chrome finish 1mm thick segment thus promoting revving. With the graphite processing, forms and composition, this piston was very well designed and studied in order to offer a better thermal expansion, agreeing at the same time perfectly with this cylinder to support the free times, brutal change Diet and prolonged endurance of circuit.
In the end, the special crankshaft 44mm stroke and 85mm rod. This model is unique and once again very successful. It is perfectly balanced and carved out the best steel market. Its dynamic balancing result of the inorganic compound to tungsten carbide. This material is summarized in a combination of carbon and tungsten. It is a known material very dense, very strong and very hard. A new connecting rod is also installed on this linkage, ultra reinforced billet model. Ultra lightweight, it is really reserved for the competition!
It is this type of rod that team real racing crankshafts BIDALOT or MALOSSI MHR BIG BORE and other rare vilo! Light weight and maximum rigidity are at the rendezvous. Its lubrication are improved, the cage rod feet is increased for a better grip, processed silver and mounted on anti-friction wedges. A linkage of you understand perfectly designed and adapted to support this high engine can withstand without no problem wildest engine speeds up to 16,000 rev / min and in combination with this cylinder and stroke 44, the actual displacement is 79,58cc.
In summary, this pack / Ø48mm 80cc racing kit for your engine Minarelli AM6 will be a major asset to offer you guaranteed victories and thrills! Delivered complete as presented, you can rely on photographs, they are binding as we usually do.
We recommend you to accompany this pack with minimum: a carburetor 28, a flexible mounting kit intake, ignition Selettra home ITALKIT with variable advance, cold NGK B105EGV obligatory racing motor oil, racing big relaxing escape ... essential volumes.
This pack contains:
Master cylinder Ø48mm aluminum 6 transfers with large exhaust boost
-piston VERTEX graphite mono segment Ø48mm
Aluminum cylinder head of -Couvercle
-Plot High compression cylinder head, the incoming type of tapered shape, polished finish
-Segment End Ø48 chromed 1mm thick
Axis-reinforced piston Ø12 X 37mm
-Clips Piston type G
-Vilebrequin Reinforced ultra long race 44mm rod 85mm ultra reinforced
X2 Celeron Bearings Ø20X47X14
-Cage To Ø12X17X15mm silver needle
-pack Motor attached with several joints of base plate of different thicknesses
X1 cylinder head for centering Pion
-Bague Exhaust Ø32 to 28mm reduction
-X4 Reinforced Clutch Springs
-X4 Reinforced Studs M7X120mm
-Installation instructions
-Autocollant
Technical summary:
- Work of original housings needed for shipments revised upwards
- Rear apron specific cylinder
- Cooling: Liquid semi-closed
- Compression ratio: 14.05: 1
- Fixing exhaust: Ø32mm
- Exhaust Diagram: 188.20
- Admission diagram (lateral transfers): 132.50
- Admission diagram (rear transfers): 132.50
- Displacement announced: 80cc
- Actual Capacity: 79,58cc
Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
This high engine fits the 50cc motorcycles following gearbox fitted the engine MINARELLI AM3, AM4, AM5, AM6 euro 1 am6 euro 2:
-APRILIA RS AM6 engine from 1997 to 2006 (after 2006, attention to motor past DERBI euro 3)
-APRILIA RX engine AM6 (after 2006, attention to motor past DERBI euro 3)
-APRILIA MX engine AM6 (after 2006, attention to motor past DERBI euro 3)
-Beta CRE
RR -Beta
-Beta RR ALU
-Honda HM
-Honda CRE
-Honda BAJA
-HUSQUVARNA WXE
-HUSQUVARNA CH
-HM DERAPAGE
-HM CRE
-MALAGUTI DRAKON
-MALAGUTI XTM
-MALAGUTI XSM
-FANTIC CABALLERO
-PEUGEOT XP6
-PEUGEOT XPS
-PEUGEOT XP STREET
-PEUGEOT XP STREET EVO
-PEUGEOT XR6
-PEUGEOT XR7
-MOTORHISPANIA RYZ
-MOTORHISPANIA RX-R
-MOTORHISPANIA RX
-RIEJU RS1
RS2 -RIEJU
-RIEJU RS2 MATRIX
-RIEJU RS2 MATRIX PRO
SMX -RIEJU
-RIEJU MRX
-RIEJU SPIKE
-KEEWAY TX EN
-YAMAHA DT
-MBK X-LIMIT
-YAMAHA TZR
-MBK X-POWER
SM -SHERCO
-SHERCO ENDURO
-SHERCO HRD
-SHERCO ENDURO
And many other machines!
Reference: VM.60.1
Quality springs for your minarelli am6 equipped engines.
Reference: 6204 TB.P63
A bearing that will support all your most advanced configurations. Real competition piece!
Reference: ESP.07.125.4
The strongest with MALOSSI, specially lengthened for high engines with wedges for stroke or long connecting rod, withstand extreme tightening torques. Amply support 25nm (2.25 mkg)!
Reference: SE.480.10.I
High quality segment, ideal for the maintenance of your high engine ITALKIT 75 and 80cc kit in diameter 48mm.
Reference: RST.222
A special competition needle cage, silver treated from ITALKIT in Ø12X17X15mm.
Reference: VJ.44.48
Replacement seals for the maintenance of your high engine 80cc Ø48mm in 44mm ITALKIT stroke on Minarelli AM6.
Reference: CU.44.82
Complete replacement cylinder head (decomposable two parts), special for the high engine in 44.00 stroke, diameter 48mm 80cc.
Reference: CU.44.50.2
Ideal in case of breakage or sheer for a refurbishment of your top big engine displacement on minarelli am6.
Reference: CU.44.80.3
Ideal in case of breakage or wear, high quality cylinder head stud, model entering ITALKIT Competition for pack and 80cc kit Ø48 mm 44.00 mm long race minarelli am6.
Reference: CB.44.10R
Mazzuchelli top-of-the-range 44.00mm long stroke special crankshaft, forged rod machined in the mass 85mm, ... with silver treated needle cage and C4 bearings.
Reference: CK.44.848.GR2
Top racing engine minarelli am6! Special race 44, 80cc kit Ø48mm, 6 transfers, large 32mm exhaust .... A real powerhouse, to accompany a long-stroke crankshaft and rod 85mm 44,00mm.
Reference: CI.44.848.GR2
Cylinder / piston without cylinder head replacement kit 80cc Ø48mm, 6 transfers, large 32mm exhaust .... To accompany a long-stroke crankshaft with 44,00mm rod 85mm and its cylinder head high compression pad.
Reference: PI.44.48A.I14
Excellent quality replacement piston for ITALKIT 80cc Ø48mm minarelli am6 kit.
Reference: 133.1012 + 200.0422 + 210.0069
Complete pack 100 POLINI BIG EVO for Minarelli am6.
Reference: K.44.849.GR2
Genuine 100% full competition pack for minarelli am6! Special race 44 and 90mm rod with ultra strengthened vilo, 80cc kit Ø48mm 32mm exhaust, Celerons bearings, clutch springs, .... A pack perfectly designed to be assembled together for maximum performance!
Reference: K.44.952.G14
A 100% complete competition pack for minarelli am6 engine! Special race 44 with ultra reinforced vilo on 14mm axis, 95cc Ø52mm 32mm exhaust kit, celerons bearings, clutch springs, studs .... A pack perfectly designed to be assembled together for maximum power!
Reference: parmakit_110_am6-pack
The famous PARMAKIT 110cc kit for MINARELLI AM6.
Reference: K.44.851.G14
A 100% complete competition pack for minarelli am6 engine! Special race 44 with ultra reinforced vilo on 14mm axis, 85cc Ø50mm 32mm exhaust kit, celerons bearings, clutch springs, studs .... A pack perfectly designed to be assembled together for maximum power!
Reference: PK88BRKAM6
A complete pack for racing engine minarelli am6! Special race with 45 vilo reinforced kit 88cc race 45, large exhaust volume, pack bearings celeron .... A lot of room perfectly designed to be assembled together for maximum performance!
Reference: qualityperf-50-rrd-am6
High quality engine overhaul pack, guaranteed high performance at a reduced price!
Reference: IM113P
The cast iron 85cc maxikit with 44mm stroke vilo for 50cc minarelli am6 engine motorcycle, super torquey and super solid! Ideal for endurance.
Reference: 9921450
The cast iron 85cc maxikit with 44mm stroke vilo for 50cc minarelli am6 engine motorcycle, super torquey and super solid! Ideal for endurance.
Reference: 9924240
A complete pack with reinforced 44mm long stroke crankshaft, bearing pack, key, aluminum cylinder 5 transfers with large bar exhaust and integrated base wedge, cap in the brand's color... ideal for preparing a high-performance engine.
Reference: 30434.M3 + 80039
A 90cc engine pack, with kit and crankshaft, it is accompanied by good bearings, a clutch, a racing exhaust and a carburetion from Ø24 to 30mm.
Reference: qualityperf-70-rrd-am6
High quality engine overhaul pack, guaranteed high performance at a reduced price!