- Pack
- New

Banner
Complete air cooling motor delivered assembled and ready to roll! With kick mounting forecast (kick ignition, kick ignition nut and kick plate). Engine includes kit alignment MVT to crankcases PARMAKIT. Machining for the passage of valves MALOSSI is also included in the 150€ custom preparation. To have the cylinder prepared, add the STAGE 1 preparation option on the cylinder.
For intake / carburation: valves MALOSSI as well as a flexible mounting intake pipe, a 21mm carburettor POLINI CP!
For the ignition part, we install a MVT MILLENIUM (analogue with small internal rotor variation). For the High Engine, we chose the MVT with RADIALE head, a high-performance engine!
The engine is supplied without spark plug, in the basic configuration we recommend a B9ES for setting and running, then a BR10EG.
Drive engine 500km. Use 100% quality synthetic oil at 2.5% in SP98 or SP100. To be installed with motor spring DOPPLER equipped with a white spring.
Only reserved for competition !!
Speed possible with good acceleration: 110km/h depending on transmission.
Target Plan: Around 12,500 rpm
Gets on:
MBK 51.
Delivered:
-Without a Dimmer (place an ER3)
-No motor spring, spring DOPPLER with white spring strongly recommended!!!
-No candle (B9ES and BR10EG recommended)
Reference: BR9HS / 4522
NGK BR9HS solid spark plug of the original type in short base for a better ignition spark.
Reference: BR8HS / 4322
Spark plug mounted on Booster, quality NGK BR8HS for better ignition spark.
Reference: 1970
What finally to offer acceleration to your MBK 51 av10, av7 ... And what to be able to put a racing variator while preserving a clutch so not to be in direct drive!
Reference: 297257
The only true adjustable racing motor spring still available for MBK 51!
Reference: 216567
Here is one of the cheapest drives on the market, ideal for increasing your motor performance without spending too much.
Reference: 1415
A pipe with a correct finish that will go very well with a carburetor 14 to 16mm in SHA.
Reference: 503210
Motor spring only, ideal for making a "homemade" mainspring or for repairing its DOPPLER spring (or adaptation to another brand).
Reference: 506270
Ignition rotor nut 11x100mm not to the right for MBK 51 moped.
Reference: 167916
A set of reinforced and treated P2R cylinder head nuts for quality maintenance of your high engines.
Reference: 5324 crantée
Toothed belt from HUTCHINSON for your mopeds MBK 51 ...
Reference: adapt_av7
For adapting a low fixing cylinder head of av7, av10, an av10 engine... On a Motobécane Motoconfort AU Moped or AV88, AV87, AV89, SP50, AV78, AV79, AV98, AV68...with AV7 engine
€24.160
|
delete
|
||
The product is no longer available in this quantity.
|
€191.660
|
Type
delete
|
||
The product is no longer available in this quantity.
|
€1.660
|
delete
|
||
The product is no longer available in this quantity.
|
€0.830
|
delete
|
||
The product is no longer available in this quantity.
|
€28.330
|
delete
|
||
The product is no longer available in this quantity.
|
€116.66
€102.660
|
delete
|
||
The product is no longer available in this quantity.
|
€0.830
|
Size
delete
|
||
The product is no longer available in this quantity.
|
€89.160
|
Type
delete
|
||
The product is no longer available in this quantity.
|
€9.990
|
delete
|
||
The product is no longer available in this quantity.
|
€22.490
|
delete
|
||
The product is no longer available in this quantity.
|
€199.170
|
delete
|
||
The product is no longer available in this quantity.
|
€49.990
|
delete
|
||
The product is no longer available in this quantity.
|
€7.490
|
delete
|
||
The product is no longer available in this quantity.
|
€0.830
|
diameter (Ø)
delete
|
||
The product is no longer available in this quantity.
|
€0.830
|
delete
|
||
The product is no longer available in this quantity.
|
€166.66
€141.660
|
Engine preparation
delete
|
||
The product is no longer available in this quantity.
|
€83.330
|
delete
|
||
The product is no longer available in this quantity.
|
Reference: moteur-rrd-eco-mbk-51-50
Complete engine assembled on demand in 50cc!
Reference: montage-51
Labor for complete engine assembly MBK 51 / AV10 engine with metrology.
Reference: MVT_G2B_51_DR
G2B competition engine for MBK 51 chassis
Reference: moteur-rrd-mbk-51-70-kick
Complete engine with kick start!
Reference: moteur-rrd-mbk-51-70-polini-racing
Complete engine assembled on demand in 70cc, flexible assembly carburation in 21mm.
Reference: moteur-rrd-av10-90-air
The 90cc RRD AIR-cooled engine for MBK 51 / Motobecane AV10.
Reference: 23083
Complete engine assembled original type, ideal for those who do not want to fully repair their engine!
Reference: moteur-rrd-av10-90-air-racing
The 90cc engine RRD aIR cooling for MBK 51 / Motobecane AV10.
Reference: moteur-rrd-mbk-51-50-malossi-liquide
Complete engine assembled on demand in 50cc, flexible carburetor assembly in 21mm.
Reference: pack_polini_51_RRD
The very complete POLINI super pack! An ideal basis for a powerful engine.
Reference: moteur-rrd-mbk-51-70-sport
Complete engine assembled on demand in 70cc!
Reference: moteur-rrd-mbk-51-70-polini-hyper-racing
Complete engine assembled on demand in 75cc, flexible carburetor assembly in 24mm with large intake, long stroke, STAGE 2 preparation!
Reference: moteur-rrd-av10-82-liquide
The 82cc RRD liquid cooling engine for MBK 51 / Motobecane AV10.
Reference: moteur-rrd-sport-mbk-51-50
Complete engine assembled on demand in 50cc!
Reference: moteur-rrd-mbk-51-70-polini-sport
Complete engine assembled on demand in 70cc, carburetion assembly in 19mm rigid.
Reference: MVT_G2B_51_LAT
G2B competition engine for MBK 51 chassis