Carburettor DELLORTO PHBH 30 AS rigid, choke with cable, without separate greasing, depression ...

The PHBH 30 AS carburetor is a model that will go very well with prepared or original motorcycles. This model does not have an oil outlet for separate lubrication or a vacuum outlet (you can add it or have it on the intake pipe), it is equipped with a cable choke, possibility of putting a lever!

Without tulip, the air filter mounting diameter is Ø 40mm threaded, the thread allows you to pass enlargement tulips to improve the venturi effect and to install large assemblies, with this carburetor, a Ø60mm tulip you is delivered.

It is ultra efficient but also practical, for example the nozzle is in the tank cap, to change it you just have to remove the tank cap. We will recommend this carburetor on very large configurations which require high revs.

Technicalities :

Brand: DELLORTO
model: PHBH
Type: female (rigid mount)
Carburetor diameter: Ø30mm
For engines: 2 stroke
Pipe side fixing Ø: Ø35mm
Starter: cable
Air filter fixing Ø: threaded Ø40mm
Ø of the delivered tulip: 60mm (not necessarily used)
Separate lubrication: yes (not necessarily used)
Depression plug: yes (not necessarily used)
Adjustable fuel inlet with filter for Ø8mm hose

The carburetor is delivered as is :

Needle well AS 266
Main jet large pitch size: 128
Secondary jet / slow speed small step size: 55
Choke jet size: 70
CPL needle size: 200
Balance type float weight 6.5 grams
Needle type: X size 02
Bushel cut: 40 °