Reference: 370.0000
Box of 10 main jets for PWK, KEIHIN, POLINI CP ... certified / controlled carburettors
Very practical to have the most precise settings possible on your PWK, POLINI CP, KEHIN, FURYTECH, OKO carburettors ...
Banner
Here is the standard basic version of the 23mm type CP from POLINI MOTORI, it is a high performance carburetor, 100% made in Italy and not in China, of high quality which is also easier to adjust!
This is the largest diameter CP carburetor that exists at the moment.
This version is therefore the standard, it has a separate greasing socket and a socket for the vacuum, its choke is a cable model with lever pull to choose from.
Basically, when we start with a POLINI CP carburetor, we already know that we are buying a much lighter carburetor than a DELLORTO, with a much better worked anti-emulsion, an aluminum tank always, an extra ordinary finish, easier settings, an excellent anti-leak needle float system, ...
This version is a superb base for engines equipped with a large displacement kit (65, 70, 80cc ...) well released with a racing exhaust, it is easy to adjust!
You can modify it to your liking with all the adjustment accessories that we sell, large diameter tulips also exist for the installation of large inlet filters and improve the venturi effect!
A tank with cap is also available for faster adjustment. The bushel is a D / 24mm, cut 30 °, nozzle 90. The needle is a CP 14 22, one after well in 2.7! You will understand, it is a resolutely sporty carburetor with a really nice price! 2 shutters are delivered to you if you do not want to use the sockets!
Summary of settings and options :
Options: caps under the tank, special machining, large diameter tulip and adjustments
Ø23mm and Ø28.5mm output (competition conical machining)
Assembly: Flexible for pipe diameter 28mm level fixing
Starter: cable or lever to choose from
Depression or separate lubrication: Yes and yes
Main jet: POLINI CP 110
Needle: CP 14 22
Secondary jet: POLINI 40
Bushel diameter 24mm cut 30 °
Parts after needle well 2.7
Richness: moderately tight and loosened by 1 turn
Air filter Ø46mm without tulip
For 6mm diameter fuel hose (or 5 forcing)
Needle clips in the middle on 5 notches
Reference: 370.0000
Very practical to have the most precise settings possible on your PWK, POLINI CP, KEHIN, FURYTECH, OKO carburettors ...
Reference: 343.0009
The gray racing version of the tank for CP POLINI carburettors.
Reference: 343.0011
Ideal for a refurbishment or in case of leak on your carburetor CP POLINI!
Reference: 343.0012
Ideal in case of breakage, loss, wear, the tank cap and its POLINI cap for your CP carbs!
Reference: 343.0013
Ideal in case of leak, for a refurbishment of your carbide POLINI CP with tank cap!
Reference: 343.0015
Ideal in case of loss, breakage ... The replacement cup for your carburettors POLINI CP.
Reference: 343.0700
Ideal in case of loss, breakage on your carburettor POLINI CP.
Reference: 343.0014
Ideal in case of wear, leakage or breakage in your carburetor Polini CP.
Reference: 343.0800
All sizes available, ideal for refurbishing or adjusting your POLINI CP carburettor.
Reference: 343.0400
The best to adjust or repair your POLINI CP carburetor!
Reference: 343.0016
Ideal to repair a worn carburetor, broken ... Delivered complete!
Reference: 343.0600
Ideal for adjusting your POLINI CP carburettors, or changing a worn needle!
Reference: 343.0004
Ideal for refurbishing your POLINI CP carburetor.
Reference: 343.0002
Ideal to refurbish your carburetor POLINI CP.
Reference: 343.0001
Ideal for refurbishing your POLINI CP carburetor.
Reference: 343.0019
A cable choke kit that mounts on all POLINI CP or PWK carburettors regardless of the brand !!!
Reference: 343.0338
Ideal for adjusting your POLINI CP carburettors!
Reference: 343.0022
The 90 ° tube kit, ideal in case of breakage or to change your straight assembly on your POLINI CP, PWK carburettors ...
Reference: 2722
A very good 22mm carburetor, with its PHBL body, it is a stable, efficient and easy to adjust carburetor for your 2T!