- -8%
Reference: 53024
Complete air richness screw for DELLORTO PHBG carburettors
The complete richness screw for your PHBG carburettors!
Banner
Here is the carburettor MALOSSI PHBG 21 AS initially delivered with the kit carburation MALOSSI Ø21mm motorcycle SUZUKI 50cc TSX, TS 50 XK / XKG / X.
Ideal to increase its performance, refurbish and above all, accompany a big kit 70cc MALOSSI!
The diameter of the air intake is Ø32mm, this rigid mounting PHBG carburetor does not have oil pump fitting.
Features :
Needle W 07
Idle jet 50
Needle well AU 262
Choke nozzle 60
Jet 92
Float 01
Reference: 53024
The complete richness screw for your PHBG carburettors!
Reference: 09444_00
The replacement tank at low prices for your DELLORTO carburettors.
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 09595_20
Needle, essential for adjustments or at the slightest wear, irregularity.
Reference: 09450
The replacement float for your carbs, ideal in the event of a fuel leak!
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 02838_00
Ideal in case of problem, breakage or loss of your old part!
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 52526_77
Ideal for refurbishing your standard PHBG or racing black edition.
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Reference: 01488_30
Idle jet for PHBG and PHBD carburettors, to obtain a correct idle when the bushel is at the bottom! With a good reaction to the opening bushel!
Reference: 09654_264
Essential part for the proper functioning of your carburettor, ideal in case of wear or breakage...
Reference: 09501_40
Essential part for the proper functioning of your carburetor, several sizes to choose from to fine-tune your settings!
Reference: 09538_00
Ideal to pass your choke cable pull or to repair your PHBG!
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 53016_00 / B53016B
Kit of complete collar for rigid carburettor PHBG and SHBC!
Reference: 53031.78
The spare cover with screws for your DELLORTO PHBG carburettors except Racing Red and Black Edition.
Reference: 360.1060
Certified Sprinkler DELLORTO INC! Choose the true quality DELLORTO!