- New
Reference: 01486_72
Main Jet For DELLORTO Carburetor Small Pitch 5mm Thread 8mm Length Genuine (INC Certified)
Certified DELLORTO INC! Choose real DELLORTO quality!
Banner
The DELLORTO Ø21mm PHBG DS racing black edition carburettor is a PHBG carburettor revised and corrected by the Italian Dellorto technicians in order to obtain even better performance as well as a simpler adjustment. For example, the needle is no longer disassembled with 2 screws but with an aluminum cap that can be unscrewed at the top and the nozzle can be disassembled without removing the tank, simply by removing the aluminum tank cap! This carburetor is of very good design and quality.
The needle, float, plug… remain identical to the normal PHBG. The alloy is of better quality, the machining also allows less rebounds of better performances by its micro scoring and shape of grip! We will regret the lack of finishing and polishing on the air filter side. The tank is it obviously in aluminum. The Ø21mm has the same body as the Ø19mm.
Material type :
-Dellorto primary jet of 92 in small steps
- Needle: type W 7
-Cutting bushel: 40 degree
-Size 60 choke nozzle
-Size 50 idle jet
- AN type needle well in size 262
-The choke is cable and the carburetor is male.
- float 4 grams
-Outside diameter pipe side : 25mm
-Outside diameter filter side : air 31 without cover, and 40 with the supplied tulip cover (mounting this tulip is also recommended).
In short it is an excellent carburettor well manufactured and thought for simple adjustments, good performance, low consumption all in a racing aesthetic. It is a carburetor widely used in competition, in endurance, on the road thanks to these various possible and simple settings, the low price of these parts, its low consumption, the ease of finding repair parts and adjustments, its racing aesthetic. ..
-Starter : cable (possibility to switch it to lever)
-Possibility of vacuum valve : yes but not compulsory (delivered with shutter)
-Separate greasing : yes but not compulsory (delivered with shutter)
Reference: 01486_72
Certified DELLORTO INC! Choose real DELLORTO quality!
Reference: 09475_40
The replacement and adjustment bushel for your PHBG carburettors, 30° or 40° cut more aggressive choices!
Reference: 53024
The complete richness screw for your PHBG carburettors!
Reference: 09444_00
The replacement tank at low prices for your DELLORTO carburettors.
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 09595_20
Needle, essential for adjustments or at the slightest wear, irregularity.
Reference: 09450
The replacement float for your carbs, ideal in the event of a fuel leak!
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 02838_00
Ideal in case of problem, breakage or loss of your old part!
Reference: 53002_00
A pack to switch your PHBG carburettors choke lever to cable choke!
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 52526_77
Ideal for refurbishing your standard PHBG or racing black edition.
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Reference: 01488_30
Idle jet for PHBG and PHBD carburettors, to obtain a correct idle when the bushel is at the bottom! With a good reaction to the opening bushel!
Reference: 09654_264
Essential part for the proper functioning of your carburettor, ideal in case of wear or breakage...
Reference: 09501_40
Essential part for the proper functioning of your carburetor, several sizes to choose from to fine-tune your settings!
Reference: 09511_254
Essential part for the operation of your carburetor, ideal in case of wear or breakage ...
Reference: 09779_00
Essential part of your carburettor PHBG for better mixing oil / petrol! Not deep model for jet small step 5mm.
Reference: 10431
The bowl bottom also called anti-emulsion washer ... Indispensable for the proper functioning of your carburetor and oil / gasoline mixing!
Reference: 09538_00
Ideal to pass your choke cable pull or to repair your PHBG!
Reference: 09812
A mass-machined brass cap for your carburetors with aluminum tank or racing black edition!
Reference: 09811_00
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 4224-82
A tulip which increases the venturi effect therefore the efficiency of your engine.
Reference: 1285
Ideal in case of leakage for a good quality repair at low price.
Reference: 213458
A necessary part for the proper functioning of your carburetor.
Reference: 1297
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
Reference: 1280
Ideal for refurbishment or for loss.
Reference: 1282
Ideal for lost or just for a refurbishment without spending too much.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 1298
The little room in which hangs the starter cable.
Reference: 4477.62
The ring which seals and tightens your intake pipes with your RIGID PHBG!
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 129517
The only wealth screws for your PHBG!
Reference: 2707
The idle screw without its spring for your PHBG!
Reference: 16962_00
The replacement cover single screw for your carburettors DELLORTO PHBG Racing Red and Black Edition.
Reference: 2632M
The real DELLORTO PHBG 21mm BT flexible, cable choke and possibility of separate lubrication! SPECIAL: Screw-on valve cover!
Reference: 525523
The rigid version and choke lever of the 21mm TUN'R PHBG! Idle and richness screw on the left of the machine!
Reference: 2696
The racing version of the 21 PHBG, of much better quality with parameters revised upwards, model Black Edition!
Reference: 2599
The rigid and cable choke version of the 21mm DELLORTO PHBG! Idle and richness screw on the left of the machine!
Reference: 2557
The rigid and choke version with lever of the 21mm DELLORTO PHBG! Idle speed and richness screw on the left of the machine!
Reference: 2912
The ultimate and ultra racing version of the 21 PHBG, of much better quality with parameters revised upwards, Red Edition model!
Reference: 201.2102
Quality CP POLINI 21mm carburettor, rigid mounting ideal for well-prepared engines!
Reference: 517453
Replacement carburettor TUN'R 'R type PHBG BT for your motorcycle, scooter ...
Reference: 2665
PHBG 21 BD Carburettor DELLORTO, real performance piece.
Reference: 2632
The real DELLORTO PHBG 21mm DS flexible, cable starter and separate greasing option! New: Screw lid to screw!
Reference: 2671
The BS 2 version of DELLORTO PHBG Genuine high quality dellorto in Ø21mm.
Reference: 2509
Genuine high quality dellorto in Ø20mm.
Reference: 201.2104
A real asset for a well-prepared engine configuration! A top-of-the-range piece 100% Made in Italy! CP EVOLUTION 21 model with lever choke, without separate lubrication or vacuum, flexible mounting ...
Reference: 141376
It is a good copy sold complete and cheaper!
Reference: 2633
The rigid version and choke lever 21mm DELLORTO PHBG!
Reference: 201.2101
A high-quality carburetor at a good price, with sockets for separate lubrication and depression! Choice of cable or lever!