Reference: 01486_72
Main Jet For DELLORTO Carburetor Small Pitch 5mm Thread 8mm Length Genuine (INC Certified)
Certified DELLORTO INC! Choose real DELLORTO quality!
Banner
We present here, the MALOSSI PHBG 21 BD carburetor. In male type it allows you to enter it into a flexible pipe without sleeve and therefore to have a short carburation which promotes acceleration and recovery.
You can also enter it with a carburetor link sleeve. These adjustment and repair parts are easily found at low prices.
The low consumption, the little noise it causes, the power and recovery it offers have made the reputation of Italian carburettors DELL'ORTO.
Feature:
-Type: male (flexible)
-Bisseau: round needle
- Pipe fixing diameter: 25mm
-Air filter filter diameter: threaded in d.32mm (possibility of placing a dellorto tulip)
-Starter: cable (can be levered)
-Separate lubrication: no
-Socket for depression: yes, this carburetor has 2 sockets for depression, lungs…
- Needle: type W16
- Needle well: AU262
- Primary jet: small step 70
- Idle jet: 48
- Choke nozzle: 60
Tip :
-polish mirror the carburetor inlet (before bushel dimension air filter)
Reference: 01486_72
Certified DELLORTO INC! Choose real DELLORTO quality!
Reference: 09475_40
The replacement and adjustment bushel for your PHBG carburettors, 30° or 40° cut more aggressive choices!
Reference: 53024
The complete richness screw for your PHBG carburettors!
Reference: 09444_00
The replacement tank at low prices for your DELLORTO carburettors.
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 09595_20
Needle, essential for adjustments or at the slightest wear, irregularity.
Reference: 09450
The replacement float for your carbs, ideal in the event of a fuel leak!
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 02838_00
Ideal in case of problem, breakage or loss of your old part!
Reference: 53002_00
A pack to switch your PHBG carburettors choke lever to cable choke!
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 52526_77
Ideal for refurbishing your standard PHBG or racing black edition.
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Reference: 01488_30
Idle jet for PHBG and PHBD carburettors, to obtain a correct idle when the bushel is at the bottom! With a good reaction to the opening bushel!
Reference: 09654_264
Essential part for the proper functioning of your carburettor, ideal in case of wear or breakage...
Reference: 53031.78
The spare cover with screws for your DELLORTO PHBG carburettors except Racing Red and Black Edition.