- New
Reference: 02838_00
Needle for carburettor DELLORTO PHBG, PHBG Racing, SHA
Ideal in case of problem, breakage or loss of your old part!
Banner
The SHA 16.16C carburetor is a simple and functional model. With its diameter of 16mm it will be largely enough on small configurations type exhaust, small kit or preparation. If you are looking for a simple carburetor to adjust, solid, cheap, efficient enough that consumes little, makes little noise! This carburetor is for you. This version C is a manual starter with lever which does not have separate lubrication, this version also has an aluminium fuel arrival. This carburettor has an air filter and an integrative gasoline filter delivered and included in the price.
Tip: accompany the 15 or 16mm pipe, carbon-type valves (thickness to choose according to your engine). Try to align at best valves and pipe. Remove one to two maximum air filter grids and plan a range of nozzles from 71 to 82 in small steps. This carburetor can be very effective.
Type of equipment equipping this carburettor when you receive it:
Timber size 12
70-step Dellorto standard sprayer
Summary:
Fixing diameter of carburettor on inlet pipe: 19mm
Mounting: rigid
Separate greasing: no
Starter: cable
Carburettor diameter 16mm
Air filter and petrol incorporates carburettor
Reference: 02838_00
Ideal in case of problem, breakage or loss of your old part!
Reference: 53051_00
A very good quality filter from DELLORTO especially for SHA.
Reference: 09249_00
The pipette spare black plastic, angled 45 ° for your carburettors DELLORTO SHA.
Reference: 06109_00
The spare fuel filter for your SHA carburettors, PHBL, PHBN, PHBE ...
Reference: 06117_00
Original DELLORTO filter (filter element) for SHA carburetor.
Reference: 126140
Delivered without its spring idle screw for DELLORTO SHA.
Reference: 04190_00
Indispensable in case of wear or loss of your old screws.
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 52533
A complete gasket set to refurbish your DELLORTO SHA.
Reference: 13412_00
Real piece of ideal replacement in case of breakage, wear ... DELLORTO quality.
Reference: 06122_02
The replacement for your float carburettors DELLORTO SHA, SHB and SHBC ...
Reference: 11837_00
Indispensable for the maintenance of your tank on carburettor DELLORTO SHA.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 08773_00
Spare parts needed in case of breakage, wear ... DELLORTO quality for all carburettors SHA.
Reference: 06108
The replacement bushel for SHA carburettor! Available in several sizes for Ø14, 15 and 16 SHA carburetors.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 1317
The replacement seal for your valve covers on DELLORTO SHA.
Reference: 126123
Ideal in case of leakage tank or just a good refurbishing!
Reference: 1318
Ideal for loss, breakage, soft shot into your throttle grip.
Reference: 123606
The pilot screw spring for your carburettors DELLORTO SHA.
Reference: 10638
A replacement cover for your carburettors DELLORTO SHA all models.
Reference: 127427
Spare clamp nut for carburettor DELLORTO SHA all models.
Reference: 0630500_536
Replacement screws to clamp on all models carburettors DELLORTO SHA.
Reference: 2151
The famous SHA 16.16 with lever starter. Ideal on your type mopeds PEUGEOT 103, MBK 51... More efficient than a 15mm, without reaching the price of a PHBG!
Reference: 2152
A version of the SHA 16.16 with lever choke and separate lubrication.
Reference: 138705
An Asian copy of SHA 15.15, decent quality at a very low price!
Reference: 1230
DELLORTO PHBN 16 BT carburettor with separate lubrication
Reference: 2150
The famous SHA 16.16 with cable choke. Ideal on your PEUGEOT 103, MBK 51 type mopeds... More efficient than a 15mm, without reaching the price of a PHBG!