Reference: 02838_00
Needle for carburettor DELLORTO PHBG, PHBG Racing, SHA
Ideal in case of problem, breakage or loss of your old part!
Banner
SHA type carburettor, Asian copy of the Italians DO. Very good quality for the price, this carburetor does not have a separate greasing socket and it is mounted with a lever tarter! Delivered complete ready to operate with its air filter!
Advice : accompany it with a 15 or 16mm pipe, carbon type valves (thickness to be chosen according to your engine). Try to align your valves and pipe as well as possible. Remove one to two maximum air filter grids and provide a set of nozzles from 75 to 85 in small steps. This carburetor can be very efficient.
Summary :
Carburetor fixing diameter on intake pipe: 19mm
Assembly: rigid
Separate lubrication: yes
Lever choke
Carburetor diameter 15mm
Air and fuel filter integrated into the carburetor
right aluminum fuel outlet
Reference: 02838_00
Ideal in case of problem, breakage or loss of your old part!
Reference: 53051_00
A very good quality filter from DELLORTO especially for SHA.
Reference: 09249_00
The pipette spare black plastic, angled 45 ° for your carburettors DELLORTO SHA.
Reference: 06109_00
The spare fuel filter for your SHA carburettors, PHBL, PHBN, PHBE ...
Reference: 06117_00
Original DELLORTO filter (filter element) for SHA carburetor.
Reference: 126140
Delivered without its spring idle screw for DELLORTO SHA.
Reference: 04190_00
Indispensable in case of wear or loss of your old screws.
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 52533
A complete gasket set to refurbish your DELLORTO SHA.
Reference: 13412_00
Real piece of ideal replacement in case of breakage, wear ... DELLORTO quality.
Reference: 06122_02
The replacement for your float carburettors DELLORTO SHA, SHB and SHBC ...
Reference: 11837_00
Indispensable for the maintenance of your tank on carburettor DELLORTO SHA.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 08773_00
Spare parts needed in case of breakage, wear ... DELLORTO quality for all carburettors SHA.
Reference: 06108
The replacement bushel for SHA carburettor! Available in several sizes for Ø14, 15 and 16 SHA carburetors.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 1317
The replacement seal for your valve covers on DELLORTO SHA.
Reference: 126123
Ideal in case of leakage tank or just a good refurbishing!
Reference: 1318
Ideal for loss, breakage, soft shot into your throttle grip.
Reference: 123606
The pilot screw spring for your carburettors DELLORTO SHA.
Reference: 10146_00
Replacement nylon ring which allows sealing and tightening on your intake pipes with your SHA carburator in rigid mounting!
Reference: 10638
A replacement cover for your carburettors DELLORTO SHA all models.
Reference: 127427
Spare clamp nut for carburettor DELLORTO SHA all models.
Reference: 0630500_536
Replacement screws to clamp on all models carburettors DELLORTO SHA.