Reference: 02838_00
Needle for carburettor DELLORTO PHBG, PHBG Racing, SHA
Ideal in case of problem, breakage or loss of your old part!
Banner
The carburetor SHA 16/16 G is a model could not be more simple and functional. With its diameter of 16mm it squeezes largely enough on the small configurations type muffler, small kit or preparation. If you look for a simple carburetor to adjust, solid, cheap, efficient enough that consumes little, makes little noise! This carburetor is for you. This version is a manual cable choke version and it has a separate greasing, this simple version also has a 45 ° plastic gasoline inlet, a lever choke and an output for throttle cable right. There is also version C (choke lever) and normal choke cable without separate greasing. This carburetor has an integrated air filter and fuel filter delivered and included in the price.
Tip : accompany it with a pipe of 15 or 16mm, valves type carbon (thickness to choose according to your engine). Try to align your valves and your pipe as well as possible. Remove one to two air filter grilles maximum and plan an array of sprinklers from 82 to 90 in small steps. This carburetor can be very powerful.
Type of equipment fitted to this carburetor when you receive it :
Boisseau size 12
Standard Dellorto nozzle of 82 in small steps
Right throttle cable outlet
Summary :
Carburetor mounting diameter on intake pipe: 19mm
Mounting: rigid
Separate greasing: yes
Lever choke
Carburetor diameter 16mm
Air filter and gasoline integrates with carburetor
45 ° plastic gasoline outlet
Reference: 02838_00
Ideal in case of problem, breakage or loss of your old part!
Reference: 53051_00
A very good quality filter from DELLORTO especially for SHA.
Reference: 09249_00
The pipette spare black plastic, angled 45 ° for your carburettors DELLORTO SHA.
Reference: 06109_00
The spare fuel filter for your SHA carburettors, PHBL, PHBN, PHBE ...
Reference: 06117_00
Original DELLORTO filter (filter element) for SHA carburetor.
Reference: 126140
Delivered without its spring idle screw for DELLORTO SHA.
Reference: 04190_00
Indispensable in case of wear or loss of your old screws.
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 52533
A complete gasket set to refurbish your DELLORTO SHA.
Reference: 13412_00
Real piece of ideal replacement in case of breakage, wear ... DELLORTO quality.
Reference: 06122_02
The replacement for your float carburettors DELLORTO SHA, SHB and SHBC ...
Reference: 11837_00
Indispensable for the maintenance of your tank on carburettor DELLORTO SHA.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 08773_00
Spare parts needed in case of breakage, wear ... DELLORTO quality for all carburettors SHA.
Reference: 06108
The replacement bushel for SHA carburettor! Available in several sizes for Ø14, 15 and 16 SHA carburetors.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 1317
The replacement seal for your valve covers on DELLORTO SHA.
Reference: 126123
Ideal in case of leakage tank or just a good refurbishing!
Reference: 1318
Ideal for loss, breakage, soft shot into your throttle grip.
Reference: 123606
The pilot screw spring for your carburettors DELLORTO SHA.
Reference: 10146_00
Replacement nylon ring which allows sealing and tightening on your intake pipes with your SHA carburator in rigid mounting!
Reference: 10638
A replacement cover for your carburettors DELLORTO SHA all models.
Reference: 127427
Spare clamp nut for carburettor DELLORTO SHA all models.
Reference: 0630500_536
Replacement screws to clamp on all models carburettors DELLORTO SHA.
Reference: 1230
DELLORTO PHBN 16 BT carburettor with separate lubrication
Reference: 138705
An Asian copy of SHA 15.15, decent quality at a very low price!
Reference: 2150
The famous SHA 16.16 with cable choke. Ideal on your PEUGEOT 103, MBK 51 type mopeds... More efficient than a 15mm, without reaching the price of a PHBG!