Warning: the mini-motorbikes we sell are POLINI mono-motorbikes, on the one hand they are made in Italy and are not to be confused with low-cost equipment. These Pocket bikes are very powerful and dangerous, not to be put into anyone's hands! They are only reserved for competition and are in no way authorized to drive on public roads! Not even a spin on the road is allowed, just like competition or equipped machines! Depending on your country of residence, mini-motorbikes may be subject to declarations even if they only run on circuits and private land! It is up to you to check this in your country in relation to these legislations when buying the mini motorcycle. After ordering, 1 to 2 months may be necessary to deliver the machine.
Here is the 910 CARENA S AIR mini bike from POLINI MOTORI Italy. This small Pocket is ideal for beginners on the competition tracks! With its 4.2 HP of power, it already offers thrills! It has a 36.69cc engine, air-cooled aluminum cylinder. It is relatively simple to tinker with and is really ideal to get into the pocket of the race. Its carburettor is a SHA 14/14. Recessed reed valve system with internal rotor electronic ignition. Its chassis is of very high quality! The front and rear brakes are Ø122mm disc brakes, 90/80-5 tires. 1.8 liter tank and full weight of 18 kg. Its length is 945mm, width 240mm and its saddle height of 385mm.
Polini engine 2-stroke single cylinder – aluminum cylinder
Bore and Stroke 36x39
Cylinder 39.7
Compression ratio 16.2:1
Carburetor SHA 14-14
Ignition Capacitive discharge electronics
Food Green gasoline blend with 2% synthetic oil
Suction With reed valve in the housing
Startup By self-rolling cord
Clutch Dry centrifuge
Frame Die-cast in light alloy with double diagonal beam
Front disc brake Ø 122
Rear disc brake Ø 122mm.
Pene before 90/80-5
rear axle 90/80-5
Tank 1.8 liters
Unloaded weight 18 Kg.
Length 945mm.
Width 240mm.
Saddle height 385mm.
