• Banner

  • New

Maxi cylinder / crankshaft kit STAGE 6 BIGRACING 88 for Minarelli AM6

S6-7018820/PACK

A complete and efficient pack for your MINARELLI AM6 88cc.

€397.49
Quantity
Shipped in 5 to 10 days.

Description

Here is the stage6 BigRacing 88cc cylinder / crankshaft pack for Minarelli AM6 engine.

Contents of the pack:

- Cylinder 88cc D.50mm, stroke 45mm - 90mm wire, made of aluminium with 5 intake transfers and an exhaust light with bar in D.32mm,

- Complete Piston Vertex mono-segment diam. 50 mm,

- High compression aluminium monobloc,

- Joint pouch (2 joints of base and oric cap).

- 5mm base plate for running mounting 45mm wire 90,

- HPC crankshaft running 45mm - 90mm rod - 12mm axis

- Set of bearings and spy joints SKF C3 polymer cages.

The design of this Stage6 BigRacing thermal unit was done in close collaboration with the MXS Racing workshop to obtain a completely innovative product.

Visually, the thermal group is quite basic but beware, appearances are sometimes misleading. Indeed, this cylinder is entirely designed on a 50 mm diameter basis, not a real lower model, so it is a real Big Bore. It thus benefits from large intake ducts and an even wider two-part exhaust!

The slogans of this BigRacing range are: simplicity, performance and reliability!

The assembly of the cylinder kit is indeed very simple and requires only a few simple millings of the engine housing. As for the squish, this one is already predefined when machining the cylinder.

From a performance point of view, we were able to obtain on our test bench (Dynojet) a power of 27,23 horsepower for 14,01 Nm with a suitable configuration (fuel 28, admission Stage6 R/T High Flow, Hyper Racing exhaust etc...).

Since the cylinder has fairly low diagrams, a fairly large water chamber and a high-quality piston, the assembly will remain reliable provided it has the appropriate settings.

The outer mould is based on an original cylinder replica and therefore has an annotation of 49cc. But we want to reassure you, it is indeed 86cc / 88cc.

Attention:

For its editing It is imperative to use longer studs (M7x120mm)

Depending on the year of your engine, you will sometimes have to mill the passage of your rod.

Not approved.

Gets on:

MINARELLI AM6 50 2T engine mount:

APRILIA MX 50 2T LC (MINARELLI AM 6)

APRILIA RS 50 2T LC (MINARELLI AM 3 ✱ 6)

APRILIA TUONO 50 2T LC (MINARELLI AM 6)

BETA ENDURO RR 50 2T LC (MINARELLI AM 6)

BETA ENDURO RR RACING 50 2T LC (MINARELLI AM 6)

BETA ENDURO RR 50 2T LC euro 4 2019- 2020 (MINARELLI AM 6)

BETA ENDURO RR 50 2T LC euro 5 2021- equivalent (MINARELLI AM 6)

BETA ENDURO RR RACING 50 2T LC euro 4 2019- again2020 (MINARELLI AM 6)

BETA ENDURO RR RACING 50 2T LC euro 5 2021- Nearby (MINARELLI AM 6)

BETA ENDURO RR SPORT 50 2T LC euro 4 2019-mentioned2020 (MINARELLI AM 6)

BETA ENDURO RR SPORT 50 2T LC euro 5 2021- Nearby (MINARELLI AM 6)

BETA MOTARD RR 50 2T LC euro 4 2019- rise2020 (MINARELLI AM 6)

BETA MOTARD RR 50 2T LC euro 5 2021- equivalent (MINARELLI AM 6)

BETA MOTARD RR SPORT 50 2T LC euro 4 2019-mentioned2020 (MINARELLI AM 6)

BETA MOTARD RR SPORT 50 2T LC euro 5 2021- Nearby (MINARELLI AM 6)

BETA MOTARD RR TRACK 50 2T LC euro 4 2019- again2020 (MINARELLI AM 6)

BETA MOTARD RR TRACK 50 2T LC euro 5 2021- Nearby (MINARELLI AM 6)

BETA SUPERMOTARD RR 50 2T LC (MINARELLI AM 6)

BETA SUPERMOTARD RR ALU 50 2T LC (MINARELLI AM 6)

FANTIC CABALLERO 50 2T LC euro 4 2019- equivalent (MINARELLI AM 6)

FANTIC ENDURO CASA 50 2T LC euro 4 2019-mentioned (MINARELLI AM 6)

FANTIC ENDURO XEF COMPETITION 50 2T LC euro 5 2021- Nearby (MINARELLI AM6 95D)

FANTIC ENDURO PERFORMANCE 50 2T LC euro 4 2019-mentioned (MINARELLI AM 6)

FANTIC ENDURO XE PERFORMANCE 50 2T LC euro 5 2021- Nearby (MINARELLI AM6 95D)

FANTIC MOTARD CASA 50 2T LC euro 4 2019-mentioned (MINARELLI AM 6)

FANTIC MOTARD XMF COMPETITION 50 2T LC euro 5 2021- Nearby (MINARELLI AM6 95D)

FANTIC MOTARD PERFORMANCE 50 2T LC euro 4 2019-mentioned (MINARELLI AM 6)

FANTIC MOTARD XM PERFORMANCE 50 2T LC euro 5 2021- Nearby (MINARELLI AM6 95D)

HM CR E DERAPAGE 50 2T LC (MINARELLI AM 6)

HM CRE SIX Comp. 50 2T LC 2013- RISING (MINARELLI AM 6)

HM DERAPAGE RR 11 50 2T LC (MINARELLI AM 6)

HUSQVARNA CH RACING 50 2T LC (MINARELLI AM 6)

KEEWAY TX EN - SM 50 2T LC (KW1E40QMB-2 )

MALAGUTI XSM - XTM 50 2T LC (MINARELLI AM 6)

MBK X-LIMIT 50 2T LC (MINARELLI AM 6)

MBK X-POWER 50 2T LC (MINARELLI AM 6)

PEUGEOT XPS 50 2T LC (MINARELLI AM 6)

PEUGEOT XR6 50 2T LC (MINARELLI AM 6)

PEUGEOT XR7 50 2T LC (MINARELLI AM 6)

RIEJU RS2 50 2T LC (MINARELLI AM 6)

SHERCO HRD 50 2T LC (MINARELLI AM 6)

SHERCO SE FACTORY R 50 2T LC euro 5 2021- Nearby (MINARELLI AM 6)

SHERCO SE FACTORY RS 50 2T LC euro 5 2021- Nearby (MINARELLI AM 6)

SHERCO SM FACTORY R 50 2T LC euro 5 2021- Nearby (MINARELLI AM 6)

SHERCO SM FACTORY RS 50 2T LC euro 5 2021- Nearby (MINARELLI AM 6)

SHERCO SM RED ONE R 50 2T LC euro 5 2021- equivalent (MINARELLI AM 6)

SHERCO SM RED ONE RS 50 2T LC euro 5 2021- Nearby (MINARELLI AM 6)

SHERCO SM SILVER R 50 2T LC euro 5 2021- equivalent (MINARELLI AM 6)

SHERCO SM SILVER RS 50 2T LC euro 5 2021- Nearby (MINARELLI AM 6)

VALENTI N01 50 2T LC euro 5 2022- equivalent (MINARELLI AM6)

VALENTI RME ENDURO 50 2T LC euro 5 2022-mentioned (MINARELLI AM6)

VALENTI RME RACE 50 2T LC euro 5 2022- Nearby (MINARELLI AM6)

VALENTI S01 SCRAMBLER 50 2T LC euro 5 2022- awake (MINARELLI AM6)

VALENTI SM 50 2T LC euro 5 2022-related (MINARELLI AM6)

VENT BAJA 50 2T LC euro 4 2019- awake (MINARELLI AM 6)

VENT BAJA RR 50 2T LC euro 4 2019- rise (MINARELLI AM 6)

VENT DERAPAGE 50 2T LC euro 4 2019- rise2020 (MINARELLI AM 6)

VENT DERAPAGE 50 2T LC euro 5 2021- equivalent (MINARELLI AM 6)

VENT DERAPAGE RR 50 2T LC euro 4 2019-mentioned2020 (MINARELLI AM 6)

VENT DERAPAGE RR 50 2T LC euro 5 2021- Nearby (MINARELLI AM 6)

YAMAHA DT 50 R 50 2T LC euro 2 (MINARELLI AM 6)

YAMAHA DT 50 X 50 2T LC euro 2 (MINARELLI AM 6)

YAMAHA TZR 50 2T LC (MINARELLI AM 6)

Product Details
15 other products in the same category:

Reference: K.44.848.G14

ITALKIT

Pack ITALKIT Racing 80cc Ø48mm (with crankshaft stroke 44 connecting rod 85mm) for mécaboite driving minarelli am6

A 100% complete racing package for minarelli am6 engine! Special racing 44 with vilo ultra reinforced, kit 80cc Ø48mm exhaust 32mm, bearings celerons, springs of clutch, dowels .... A pack perfectly designed to be assembled together for maximum performance!

Price €333.33
Attention, requires a period of more than 20 days!
More
Attention, requires a period of more than 20 days!

Reference: 10500967

BIDALOT

Pack BIDALOT Racing WR 96cc Ø50mm (with crankshaft stroke 48 connecting rod 95mm) for mécaboite minarelli am6 engine

Ø50mm, huge diagrams, 48mm stroke, 95mm connecting rod, huge exhaust outlet with 4 screws... Everything is as incredible as it is specific on this 96cc kit!

Price €573.33
Variable delay according to BIDALOT factory! May need more than 20 days!
More
Variable delay according to BIDALOT factory! May need more than 20 days!

Reference: 9924240

TOP PERFORMANCES RACING (TPR)

Maxi kit TOP PERFORMANCES RACING TPR aluminum 86cc (with crankshaft) minarelli am6

A complete pack with reinforced 44mm long stroke crankshaft, bearing pack, key, aluminum cylinder 5 transfers with large bar exhaust and integrated base wedge, cap in the brand's color... ideal for preparing a high-performance engine.

Price €349.99
Shipping in 8 to 15 days depending on factory arrivals TOP PERFORMANCES
More
Shipping in 8 to 15 days depending on factory arrivals TOP PERFORMANCES

Reference: K.44.952.G14

ITALKIT

Pack ITALKIT Racing 95cc Ø52mm (with crankshaft stroke 44 connecting rod 85mm and axis 14mm) for mécaboite minarelli am6

A 100% complete competition pack for minarelli am6 engine! Special race 44 with ultra reinforced vilo on 14mm axis, 95cc Ø52mm 32mm exhaust kit, celerons bearings, clutch springs, studs .... A pack perfectly designed to be assembled together for maximum power!

Price €349.99
Shipping in 1-3 days
More
Shipping in 1-3 days