Reference: 317.0005
Stud POLINI M6 X 32mm for exhaust, pipe admission ...
Set of 2 M6 studs that can be used for many applications.
Banner
Here is a kit very famous for its strength and its excellent power / torque ratio. This cast POLINI has a Ø46mm bi-segment piston with 10mm axis, a high quality cast iron cylinder has 7 intake transfers and oval exhaust.
Its diagrams and its two-segment piston preserve good torque so that the engine is not hollow at low speed. You will still be certainly amazed at how efficient this high engine is at high revs.
You can mount it with the original cylinder head. POLINI announces the power of 4.8HP at 6300 rpm. But with good equipment (carburetion, variation, admission, exhaust ...) we can get out of it largely 9 to 10hp.
It is really complete because it even comes with a forest to bore the original carburetor jet so as not to be too poor! You can put it with a carburation of 17.5 to 19mm maximum. No need to switch to a large carburetor of 21mm or more on this kit because its exhaust outlet is narrow to offer good engine behavior at low speed! If we want more powerful, we will switch to ATHENA for example!
As an option we offer a stage 1 preparation, this preparation is a modification of the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Mounts on :
HONDA CAMINO 50
HONDA PX 50
HONDA QR 50 (child motorcycle)
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: 272.0120
POLINI replacement clips for 10mm piston pins.
Reference: 204.0270
Available in Ø46mm or re-bore for your 70cc cast iron kits on HONDA CAMINO and PX 50!
Reference: 209.0231
The seal pack for your POLINI 70cc cast iron kits on HONDA CAMINO and PX 50.
Reference: 252.0004
The high quality standard round copper seal Ø30mm from POLINI.
Reference: 206.0260
Replacement segments for your HONDA CAMINO and PX 50 46mm cast iron kits.
Reference: 271.0170
The spare piston pin Ø10 X 36mm, ideal in case of loss, wear, breakage ...
Reference: 31 3642
MALOSSI 70cc cast iron kit for Honda Camino and PX. Excellent compromise between power and torque
Reference: 31203.00
The most powerful 70cc for HONDA Camino, PX, ...
Reference: 133.0072
70cc POLINI cast iron piston cylinder kit, very robust, efficient and torquey, ideal for everyday use!
Reference: 009300
Kit 70cc ATHENA Racing, for HONDA Camino delivered without cylinder head
Reference: KT00048
A high, solid and efficient 70cc engine, ideal for increasing your performance and doing many km.