Reference: 040810347
Ø47mm cylinder head for kit 74cc aluminum AIRSAL on Derbi Variant Start, Start 5
Spare cylinder head Ø47mm for kit 74cc aluminum AIRSAL on Derbi Variant Start, Start 5.
Banner
Attention, high engine reserved for the competition on circuit, closed road.
New in 2014 and extremely rare, here is the unique and complete 74cc engine with a diameter 47mm bore, an unbeatable quality / price ratio well known by the famous Spanish brand AIRSAL. This set will be ideal for your DERBI Variant moped and thus obtain a high performance gain compared to a 50cc kit or original engine.
The cylinder diameter 47mm was designed and made in the best alloys of aluminum with a treatment nikasil thus offering its solidity. Just like the original cylinders or other brands, this engine is recognizable thanks to the fins and a very specific mold. The finish and its architecture are smooth and clean.
Equipped with 6 transfers of admission of which 4 laterals and 2 in the back, of an exhaust of rectangular shape revised on the rise accompanied by 2 boosters. The general cooling of the engine will also be improved thanks to the materials used, offering better heat dissipation and therefore more performance.
The piston is a two-segment AIRSAL model with two large lateral grease nipples, it will offer you all the necessary torque during your rework and acceleration (increased friction) without neglecting the high speeds thanks to the two thin segments chrome. The latter is of course provided with axle and piston clips.
Let's talk a little about the breech, delivered naked without decompressor, it will offer a surplus of performance accompanied by its cylinder. A rare and unique version that the brand AIRSAL offers here. High compression model with hemispherical chamber, polished finish. Light and fully aluminum, the heat exchange will be significantly improved too. Parts being more and more rare, this kit is of course delivered complete as shown in photo.
We advise you to accompany this high engine with at least : carburation in flexible assembly 19 or 21 mm for the better, cold candle racing, crankshaft and reinforced bearings always for the best and to avoid any breakage of the low engine, engine oil 100% synthesis racing ....
Contains :
-Cylinder Ø47mm aluminum 6 transfers with exhaust boosters
-Compass high compression hemispherical chamber polished finish
-Biston piston with side grease fittings
-Segment chrome finish 1mm thickness
-Axle piston Ø12 X 40mm
-Clips in G
-Pack joints
-Exhaust studs
Optionally we offer a stage 1 preparation, this preparation is a modification of the exhaust port by increasing the diagrams and improving the pipe, it increases the performance of the cylinder. An improvement of the bottom of skirt is also included in this modification. Allow a little extra time for this preparation!
These engines are also built on BYE BYKE ...
Specific References
Reference: 040810347
Spare cylinder head Ø47mm for kit 74cc aluminum AIRSAL on Derbi Variant Start, Start 5.
Reference: 140810347
Lets not have a leak in your cyclinder / head Ø47mm your DERBI VARIANT, START ...
Reference: 110810347
Provides a good compression or replace in case of damage to the installation!
Reference: 23107.00
The highest performance of 65cc for Derbi Variant market market!
Reference: 23105.00
The highest performance of 68cc for Derbi Variant market market!
Reference: CIL-903-S
65cc BARIKIT kit for DERBI Variant, offering good performance at high speed at a reasonable price.
Reference: CIL-904-S
65cc BARIKIT RACING kit mono-semgent version for DERBI Variant, offering good performance in high speed at reasonable price.
Reference: 02080244
65cc AIRSAL kit for DERBI Variant, offering good performance at high speed at a reasonable price.
Reference: CIL-1037-S
The most efficient kits for DERBI VARIANT currently on the market!
Reference: 23113.00
The most efficient cylinder of the 65cc of the market for DERBI Variant!