- -8%
Reference: 2313361.A0
Ø10mm axis X 0.5 X 38mm + C clips for kits MALOSSI Ø46,5 a 47mm minarelli scooter, piaggio ciao ...
Reinforced MALOSSI piston pin, ideal for the loss of the old piston pin!
Banner
Complete kit 70cc MALOSSI Ø46,5mm in cast iron mounted bi segment, it comes with the cylinder head, it is the largest model from MALOSSI. Select the 10 or 12mm axle model depending on your crankshaft.
This cylinder is really the most worked, it has many transfers and the famous CVF architecture with doubled lights. The charts remain fairly low. The combustion chamber is high compression and of specific shape.
The materials used are more of the range, this high engine will offer absolutely different performance from the origin, both in terms of torque and power, to accompany a large carburation, a reinforced crankshaft and a racing exhaust .
The pack contains :
Cylinder
Piston
Axis
Clips
Cylinder head gasket
Base gasket
Segments
Notice
Stickers
Spare parts :
Cylinder head
Piston pin with Ø10mm C clips
Piston pin with G clips Ø10mm
Piston pin with Ø12mm C clips
Piston pin with G clips Ø12mm
Piston clips type G Ø10mm
Piston clips type C Ø10mm
Piston clips type G Ø12mm
Piston clips type C Ø12mm
Piston
Segments
Mounts on :
PIAGGIO Ciao
PIAGGIO Ciao Px
PIAGGIO BRAVO
PIAGGIO BOXER
And other models.
As an option we offer you a stage 1 preparation, this preparation is a modification of the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
ATTENTION 31 6156 OUT OF PRODUCTION
Reference: 2313361.A0
Reinforced MALOSSI piston pin, ideal for the loss of the old piston pin!
Reference: 3612541
Do not forget to change with each reassembly for maximum strength.
Reference: 34 6429
Ideal for maintenance or in case of breakage, wear .... The MALOSSI spare piston to cylinder 70cc CVF Ø46,5mm cast! On PIAGGIO Ciao.
Reference: 35 6218
Essential for the maintenance of your cylinder in the event of wear or compression loss!
Reference: 27 4459
A valve smaller than the original provided for the BIG DEPS 70cc Ø47mm kit.
Reference: 3118711
A high-performance, ultra-solid cast iron engine for your CIAO!
Reference: 3818740
Culasse MALOSSI very good quality for your CIAO!
Reference: 064900
One of the only aluminum kit that will bring you considerable power gain without denigrating the reliability of your PIAGGIO.
Reference: 140.0065/10ST
The famous POLINI 43mm for piaggio ciao cast iron without cylinder head.
Reference: 140.0136
Finally get rid of the constraints of the CIAO engine, switch to 4 studs and a large diameter exhaust ball joint to release the power!
Reference: KT00067
A high quality engine with nice performance!
Reference: 3118709
The CVF piston cylinder 65cc 43mm for PIAGGIO CIAO without cylinder head!
Reference: 3118050 / 3118052
The must of 70cc kit for PIAGGIO Ciao. A real performance monster with 6 intake transfers, large bar exhaust, high compression cylinder head ... An exceptional high engine for guaranteed performance !!!
Reference: 15067000
Here is the very efficient Quattrini racing cylinder for Piaggio Ciao. Superior quality, with an exceptional efficiency compared to the different 63cc on the market by a modified cylinder design for bearing to the usual problems of exhaust obstruction on the cylinders of Piaggio Ciao
Reference: 3118557 / 3118732
An excellent compromise between strength and power to correct price for the quality.
Reference: 57240.00
Cylinder head without strong and efficient for your moped PIAGGIO CIAO. Available in 10 or 12mm axle choices.
Reference: 140.0066
A big and solid kit that will offer torque to your PIAGGIO Ciao!
Reference: 020609435
A high quality and resistant engine! Model without cylinder head.
Reference: 48103.00
A high quality and resistant engine! The most powerful kit on the market for VELOFAX PIAGGIO type engine!
Reference: 061300
A very clean and well finished cast iron kit that will bring you considerable power gain without denigrating the reliability of your PIAGGIO.
Reference: 5007
Cylinder without solid and powerful ass for your moped PIAGGIO CIAO. Available in 10mm axis only.
Reference: 116.0145
An excellent very torquey and robust kit for your old PIAGGIO VESPINO, VELOFAX and your GILERA VALE, TOLEDA, GSA, ALX!