- -8%
Reference: 2313361.A0
Ø10mm axis X 0.5 X 38mm + C clips for kits MALOSSI Ø46,5 a 47mm minarelli scooter, piaggio ciao ...
Reinforced MALOSSI piston pin, ideal for the loss of the old piston pin!
Banner
Strong, torquey and efficient! Here are the top complete engine with cast iron kit MALOSSI 70cc cylinder head Ø46,5mm diameter. Available for shaft Ø10 or 12mm, this cylinder has a very good overall finish, the font used is excellent, it has many transfers and famous architecture CVF with doubled lights. To install this kit, machining low engine casings will be necessary to ask him.
The exhaust duct is also very well designed and built. The cylinder head has a high combustion chamber pressure and specific form, your compression will be optimized. The materials used are of the highest quality and stronger, this high engine will offer completely different performances of the origin and clearly felt, both in terms of the torque speed.
The piston is a bi-specific segment model for this architecture CVF MALOSSI cylinder with lights lined transfers. It will encourage the couple to high speeds by increased friction and segments of 1.5mm thickness steel. Comes complete with all accessories presented.
We recommend to accompany this high engine with at least: a 17.5mm carburetor, engine oil 100% synthetic racing, reinforced crankshaft, competition candle, an escape to freed volumes ....
The pack contains:
- Cast iron cylinder 70cc Ø46,5mm
- Cylinder head high compression aluminum
- Piston bi segment
- X2 Segments steels Ø46,5mm X 1.5mm
- Piston Pin
- Clips
- Cylinder head gasket reinforced aluminum
- Joint of base plate
- notice
- Stickers
Itself on:
-PIAGGIO 50 BRAVO
-PIAGGIO BOSS 50
-PIAGGIO 50 GRILLO
-PIAGGIO SI 50
-PIAGGIO Superbravo 50
-PIAGGIO CBA 50
And other models ...
Optional we offer a preparation course 1, this preparation is a modification of the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
Reference: 2313361.A0
Reinforced MALOSSI piston pin, ideal for the loss of the old piston pin!
Reference: 3612541
Do not forget to change with each reassembly for maximum strength.
Reference: 36 6941
Ideal for the refurbishment of your engine!
Reference: 34 6429
Ideal for maintenance or in case of breakage, wear .... The MALOSSI spare piston to cylinder 70cc CVF Ø46,5mm cast! On PIAGGIO Ciao.
Reference: 11 6145B
The spare joint pack for the high engine 70cc Ø46,5mm cast iron on PIAGGIO CIAO!
Reference: 35 6218
Essential for the maintenance of your cylinder in the event of wear or compression loss!
Reference: 27 4459
A valve smaller than the original provided for the BIG DEPS 70cc Ø47mm kit.
Reference: 38 6368
Replacement cylinder head for MALOSSI high engine 70cc Ø46.5mm cast iron with 10 or 12mm axis.
Reference: 140.0133/10R
Following many requests, POLINI finally comes out! The version FONTE RACING for ciao !!!
Reference: 140.0136
Finally get rid of the constraints of the CIAO engine, switch to 4 studs and a large diameter exhaust ball joint to release the power!
Reference: 3118709
The CVF piston cylinder 65cc 43mm for PIAGGIO CIAO without cylinder head!
Reference: 48103.00
A high quality and resistant engine! The most powerful kit on the market for VELOFAX PIAGGIO type engine!
Reference: 116.0145
An excellent very torquey and robust kit for your old PIAGGIO VESPINO, VELOFAX and your GILERA VALE, TOLEDA, GSA, ALX!
Reference: 3118213
The most powerful kit on the market for PIAGGIO CIAO! The BIG DEPS 4!
Reference: 140.0065/10ST
The famous POLINI 43mm for piaggio ciao cast iron without cylinder head.
Reference: 57240.00
Cylinder head without strong and efficient for your moped PIAGGIO CIAO. Available in 10 or 12mm axle choices.
Reference: 3118050 / 3118052
The must of 70cc kit for PIAGGIO Ciao. A real performance monster with 6 intake transfers, large bar exhaust, high compression cylinder head ... An exceptional high engine for guaranteed performance !!!
Reference: 065500
A very clean and efficient kit, in aluminum which will bring you a considerable gain in power without neglecting the reliability of your CIAO. In addition to this, you need to know more about it.
Reference: 3118567
The famous MALOSSI CVF available in 10 and 12mm axle with its radial head for CIAO.
Reference: 064900
One of the only aluminum kit that will bring you considerable power gain without denigrating the reliability of your PIAGGIO.
Reference: 140.0133
A kit very well finished this kit allows a maximum of torque and solidity out of norm.
Reference: 061300
A very clean and well finished cast iron kit that will bring you considerable power gain without denigrating the reliability of your PIAGGIO.
Reference: 020609435
A high quality and resistant engine! Model without cylinder head.
Reference: KT00067
A high quality engine with nice performance!