- -8%
Reference: 6611785B
Needle cage reinforced MALOSSI Ø12X17X16mm minarelli am6, DERBI, PIAGGIO, scooters ...
High quality needle cage, reinforced! ideal on the most advanced configurations.
Banner
Not approved, formally prohibited on the road, reserved for competition and closed, private circuits.
The MALOSSI MHR 70cc kit is a kit based between very high performance and maximum solidity. This kit has a bore of 47.6mm and is made of aluminum with a high titanium content! It has received perfect machining straight from Malossi and is the strongest on the whole market, hence the reputation of the aluminum cylinders of this great Italian brand.
As for the piston, it is a special alloy with a very high percentage of silicon, to guarantee very good resistance to heat and non-deformability to temperature variations. In addition it has received a graphite treatment which allows it a very low coefficient of friction.
Its unique cast iron segment has hard chrome, anti-wear, is already pre-run !!!
The cylinder head has received a whole new geometry of the areas of heat exchange increased and recalculated. The completely redesigned combustion chamber for a high compression ratio and high turbulence.
As you can see in our photos, this kit comes complete, with cylinder, piston, cylinder head, seals ... but also a set of blades and its needle cage in Ø12mm axis!
We advise to accompany this kit to the MINIMUM: adapted racing exhaust, full 19mm carburetor kit, reinforced bearing kit set C3 or C4, reinforced crankshaft, cold racing spark plug.
Optionally we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust light by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement in the piston and bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Mounts on :
APRILIA APRILIA MOJITO CUSTOM 50 2T
APRILIA APRILIA SCARABEO CLASSIC 50 2T euro 4 2018-> (CA91M)
APRILIA APRILIA SCARABEO STREET 50 2T (PIAGGIO)
APRILIA APRILIA SCARABEO STREET 50 2T euro 4 2018-> (CA91M)
APRILIA APRILIA SPORTCITY ONE STREET 50 2T euro 2
APRILIA APRILIA SR MOTARD 50 2T euro 2
APRILIA APRILIA SR MOTARD 50 2T euro 4 2018-> (CA41M)
DERBI DERBI ATLANTIS - BULLET 50 2T 2003->
DERBI DERBI VARIANT Sport 50 2T
GILERA GILERA EASY MOVING 50 2T
GILERA GILERA ICE 50 2T
GILERA GILERA STORM 50 2T
GILERA GILERA STALKER 50 2T
GILERA GILERA TYPHOON 50 2T
GILERA GILERA TYPHOON X 50 2T
ITALJET ITALJET JET SET 50 2T
PIAGGIO PIAGGIO DIESIS 50 2T
PIAGGIO PIAGGIO NRG EXTREME 50 2T
PIAGGIO PIAGGIO FLY 50 2T
PIAGGIO PIAGGIO FREE 50 2T
PIAGGIO PIAGGIO LIBERTY 50 2T
PIAGGIO PIAGGIO NRG MC3 DT 50 2T
PIAGGIO PIAGGIO NRG Power DT 50 2T (C453M)
PIAGGIO PIAGGIO SFERA RESTYLING 50 2T
PIAGGIO PIAGGIO SFERA 50 2T
PIAGGIO PIAGGIO TYPHOON 50 2T 2007-> 2010
PIAGGIO PIAGGIO TYPHOON 50 2T euro 2 2011-> 2017 (C421M)
PIAGGIO PIAGGIO TYPHOON 50 2T euro 4 2018-> (CA41M)
PIAGGIO PIAGGIO ZIP Fast Rider 50 2T
PIAGGIO PIAGGIO ZIP 50 2T 2000-> (C25EM)
PIAGGIO PIAGGIO ZIP 50 2T <-1999
VESPA VESPA ET2 50 2T 2000->
VESPA VESPA ET2 50 2T <-1999
VESPA VESPA LX 50 2T
VESPA VESPA Primavera 50 2T euro 2 (C533M)
VESPA VESPA S 50 2T euro 2 (C381M)
VESPA VESPA Sprint 50 2T euro 2
Reference: 6611785B
High quality needle cage, reinforced! ideal on the most advanced configurations.
Reference: 27 7054.K0
Ideal for fine-tuning your settings and improving your performance!
Reference: 36 4450
Do not forget to change at each winding to prevent engine failure thereafter.
Reference: 34 8654.A0
A spare piston high-end treatment with graphite, several sizes available!
Reference: 19 3298E
Set of 2 M6 studs which can be used for many applications.
Reference: 2311783B
Piston pin with shaped clips "C", essential for refurbishment quality and reliable.
Reference: 3513982B
Ideal for refurbishing your high engine.
Reference: 06 4993B
Spare O-ring for the refurbishment of your engine compression!
Reference: 06 8826
MALOSSI cylinder head surround O-ring.
Reference: 11 7570
Indispensable for the refurbishment of your high engine MALOSSI MHR 70cc aluminum PIAGGIO / GILERA Air (Typhoon, NRG ...)
Reference: 11 8605
Ideal for correcting the squich of your cylinder and getting the maximum performance!
Reference: 9921550
Complete kit in high quality aluminum delivered with its cylinder head and needle cage.
Reference: 01061446
A good ratio between torque, power, price and strength.
Reference: 010628476
A review kit and worked while keeping a reasonable price and lifetime extension cord.
Reference: 9931250
A 100% complete, efficient and reliable 70cc cast iron kit for PIAGGIO / GILERA air cooled engine.
Reference: 072600
Special kit crankshaft race long 44mm! Mounts on scooters PIAGGIO / GILERA 75cc of origin! Or on scooters PIAGGIO / GILERA 50cc with crankshaft race long 44mm!
Reference: 140.0214
Powerful kit in aluminum, above the cast iron RACING and below the EVOLUTION 3!
Reference: 02061446
Ideal to start again on a high-performance kit at a lower cost.
Reference: 010617476
A kit revised and more worked while keeping a reasonable price.
Reference: 9930060
A alu 70cc 100% complete, efficient, robust and reliable engine PIAGGIO / GILERA
Reference: 082000
A very high quality, powerful and robust kit!
Reference: 140.0181
A high engine with a very good quality / price / performance ratio! For us, one of the best on the market in 70cc for PIAGGIO scooter.
Reference: KT00086
A high engine 70cc solid and powerful, ideal to increase your performance.
Reference: 31 6926
A kit coupleux and very solid. Ideal for everyday use.
Reference: 140.0181/R
The cast iron racing, also named CORSA! Super strong but super powerful!
Reference: 020628476
A good ratio between torque, power, and price stability.
Reference: 30.424/M
A high performance kit at high speed with high-end manufacturing. Made in Italy.