Complete reinforced chain kit FRANCE EQUIPEMENT of original size so no 520, crown 42 teeth, sprocket from 10 to 17 teeth to choose from. Ideal for starting fresh on your APRILIA RS 250 2T motorcycle, 4 versions to choose from:
-Reinforced O'RING: with an RK520SO chain, self-lubricated type O-ring
-Super-Reinforced RX'RING: with an RK520FEX chain, self-lubricating type O-ring
-Ultra Reinforced XW'RING: with an RK520GXW chain, self-lubricating type O-ring
The pinion and crown are cut from the best materials for optimal quality and life! You should know that the original APRILIA RS 250cc motorcycles are equipped with a fairly low range 14x42 chain kit (identical to the simple ultra reinforced here)! You will choose a larger cog or a smaller crown for more top speed, and a smaller cog for more acceleration! Attention, a longer chain kit is more difficult to pull, so plan at least one exhaust line and a sport air filter to pull an extra tooth or two of the sprocket. One tooth on the pinion is approximately equivalent to 5 teeth on the crown!
Example :
If your speed in 14X52 teeth is 100 KM/H at 8000 rpm
It will be: 104KM/H in 14X50 teeth at 8000 rpm
It will be: 107.14 KM/H in 15X52 teeth at 8000 rpm
It will be: 111.43KM/H in 15X50 teeth at 8000 rpm
Mounts on :
Motorcycle APRILIA 250 RS (LD000/LD001/LD002) 1995
Motorcycle APRILIA 250 RS (LD000/LD001/LD002) 1996
Motorcycle APRILIA 250 RS (LD000/LD001/LD002) 1997
Motorcycle APRILIA 250 RS (LDA00) 1998
Motorcycle APRILIA 250 RS (LDA00) 1999
Motorcycle APRILIA 250 RS (LDA00) 2000
Motorbike APRILIA 250 RS (LDA00) 2001
Motorbike APRILIA 250 RS (LDA00) 2002
Motorbike APRILIA 250 RS (LDA00) 2003
Motorbike APRILIA 250 RS (LDA00) 2004