Kit complete chain reinforced FRANCE EQUIPEMENT size original so no 428, with ring number of teeth with the choices (from 39 to 51), sprocket 12, 13, 14, 15, 16 and 17 teeth with the choices. Ideal for again has nine on your HYOSUNG 125cc, 3 versions to choose from:
-Strengthens: With RK chain 428 HZ STANDARD Reinforced
-Strengthens O'ring: RK428KRO with self-lubricated chain with seals o'ring for less netretient and strengthened.
-Super reinforced RX'RING: With RK chain 428 XSO HYPER Reinforced X-ring, so with seal holding the lubrication! Top notch!
The pinion and the crown are cut from the best materials for quality and optimum life! Note that original, motorcycles are 125cc HYOSUNG équippées a fairly low range channel kit (same as first prize here)! You will choose a bigger sprocket or a smaller crown for more top speed, and a smaller gear for more acceleration! Attention kit longest chain is more difficult to tier, so plan at least one exhaust system and a sports air filter to pull a tooth or two gear and more. A tooth pinion area equivalent to 5 teeth crown!
example:
If your speed 14X52 teeth is 100 KM / H 8000 rpm
It will be: 104km / H 14X50 teeth 8000 rpm
It will be: 107,14KM / H 15X52 teeth 8000 rpm
It will be: 111,43KM / H 15X50 teeth 8000 rpm
....
Originally, the HYOSUNG motorcycles are mounted as follows:
HYOSUNG CRUISE GA I, XRX 125: 14X48 teeth
HYOSUNG XRX SM 125: 14X46 teeth
GA HYOSUNG CRUISE II and GF SPEED 125: 14X47 teeth
HYOSUNG AQUILA GV 125: 13X48 teeth
Itself on:
HYOSUNG CRUISE I GA 125
HYOSUNG CRUISE GA II 125
HYOSUNG GF SPEED 125
HYOSUNG GV 125 Aquila
HYOSUNG GV 125 C Aquila
HYOSUNG RX D 125
HYOSUNG RX SM 125
HYOSUNG XRX 125
