• Banner

Chain kit FRANCE EQUIPEMENT reinforced for QUAD DINLI DL901 450cc from 2005 to 2009
  • Chain kit FRANCE EQUIPEMENT reinforced for QUAD DINLI DL901 450cc from 2005 to 2009

FRANCE EQUIPMENT reinforced chain kit for QUAD DINLI DL901 450cc from 2005 to 2009

524500.162 / 163 / 164

Much higher quality made in France chain kit for your quad DINLI 360cc pinion in 13, 14 and 15 teeth and crown in 40 and 42 teeth! 3 chain qualities to choose from!

Nombre de dents a la couronne
Model
Nombre de dents au pignon
€107.49
Quantity
Attention, 20 days of delay

Description

Complete chain kit reinforced FRANCE EQUIPMENT original size so no 530, crown and pinion with teeth to choose from. Ideal to start fresh on your DINLI quad, 3 versions to choose from.

 

Reinforced O-RING: With a chain RK520SO Reinforced O-ring, therefore with seal which maintains the lubrication!


Super Reinforced: With a Super Reinforced RK520FEX chain


Ultra Reinforced: With an Ultra Reinforced RK520GXW chain


The pinion and the crown are cut in the best materials for a quality and an optimal lifespan! You should know that the original DINLI 450cc quads are equipped with a fairly low range chain kit (identical to the first price here), and a final transmission in 14X42 ! You will choose a bigger pinion or a smaller crown gear for more top speed, and a smaller pinion for more acceleration! Be careful, a longer chain kit is more difficult to pull, so plan at least an exhaust line and a sport air filter to pull a tooth or two more sprocket. A tooth at the pinion is approximately equivalent to 5 teeth at the crown! The best for speed is to use a smaller crown which will also be lighter and therefore easier to carry!


Example:
If your speed in 13X32 teeth is 65 KM / H at 10,000 rpm
It will be: 72KM / H in 14X32 teeth at 10,000 rpm
It will be: 79KM / H in 13X28 teeth at 10 000rpm
It will be: 80 KM / H in 15X32 teeth at 10,000 rpm


Mounts on DINLI 450cc quads from 2005 to 2009.

Product Details
You might also like