Carbide orientable kit PWK 28mm SPECIAL CARTERS MALOSSI, EUROCILINDRO, OMEGA... bent flexible mounting MBK 51, PEUGEOT 103

Good quality high performance carburation kit consisting of a large diameter carburetor 28mm PWK POLINI, an orientable pipe MALOSSI two standard cable clamps and two accelerator or starter cables! We provide a VL18 racing single-lame valve in the pack (on the bench we got more power than with the real VFORCE or TPR TASSINARI, a little less torque has low speed, but a much higher power has high speed, which is clearly of interest to us on a variator machine), the pipe venturi is well aligned there! We also provide a cable starter drive kit for the carburettor.

MBK 51: To be placed on EUROCILINDRO or copy as the OMEGA, "EUROCLINDRO", ALIM... obviously on very large engine configurations!

PEUGEOT 103 SPX, MVX, RCX, CLIP and FUN: To be placed on carts MALOSSI or copy like CARENZI obviously on very large engine configurations!

No air filter is included in the pack.

*Delivered without additional adjustment nozzles, without fuel duration, without sheath

**We recommend mounting the valve with an intake hold between the crankcase and the valve in order to increase the low engine volume on the 70cc and +, on the 50cc engines, remove the hold from the basket after addition! Tightening of the pipe at 9nm torque to the blue net brake.