• Banner

  • Pack
  • New

Carburation kit PWK 26mm SPECIAL CARTERS MALOSSI, EUROCILINDRO, OMEGA... bent flexible mounting for MBK 51 and PEUGEOT 103

kit_carburation_pwk_26_coudé_eurocilindro_MALOSSI
Description

Good quality high performance carburation kit consisting of a large diameter carburetor 26mm PWK POLINI, a 3D printed EPC pipe, a flexible sleeve, its collars, four pipe screws, two standard cable clamps and two accelerator or starter cables! We provide a VL18 racing single-lame valve in the pack (on the bench we got more power than with the real VFORCE or TPR TASSINARI, a little less torque has low speed, but a much higher power has high speed, which is clearly of interest to us on a variator machine), the pipe venturi is well aligned there! We also provide a cable starter drive kit for the carburettor.

MBK 51: To be placed on EUROCILINDRO or copy as the OMEGA, "EUROCLINDRO", ALIM... obviously on very large engine configurations!

PEUGEOT 103 SPX, MVX, RCX, CLIP and FUN: To be placed on carts MALOSSI or copy like CARENZI obviously on very large engine configurations!

No air filter is included in the pack.

*Delivered without additional adjustment nozzles, without fuel duration, without sheath

**We recommend mounting the valve with an intake hold between the crankcase and the valve in order to increase the low engine volume on the 70cc and +, on the 50cc engines, remove the hold from the basket after addition! Pipe clamping with 4.5NM torque and ATHESIL paste mounting ATHENA compulsory!

Product Details
kit_carburation_pwk_26_coudé_eurocilindro_MALOSSI

This pack contains

11 other products in the same category: