Reference: BR10EIX / 6801
NGK Racing BR10 EIX iridium long base spark plug (cold index)
NGK BR10 EIX racing spark plug, for better ignition and a performance gain.
Banner
Here is the very last POLINI 100cc kit for MINARELLI AM6, it is really 93.40cc of displacement, some say it is 100cc with the shim, in fact it is simply impossible, it should be installed with a 46mm stroke or more to take 100cc. It has a diameter of 52mm and is to be installed with the 44mm stroke crankshaft, 95mm connecting rod for Ø13mm piston pin only! Attention, we are talking about a powerful kit ... To be used with a 28 to 32mm carburetor, a POLINI racing exhaust suitable for large engine displacement, variable ignition, a reinforced clutch ... Polini has installed a single piston. segment in order to release the high revs, they have greatly improved the cooling, fitted a cylinder head with a polished hemispherical chamber, the exhaust duct has been very freed for more performance, goodbye the small Ø25 / 28mm duct, we move on on a 3-screw flange fixing (be careful, it will not necessarily be easy to install another pot than the POLINI unless you weld a fitting on the steel plate supplied). The exhaust is bar, 6 huge transfers to the admission .... Very very heavy!
We recommend a squish between 0.6 and 0.90mm (torque / extension). This kit requires to release at least the lip of bottom of skirt on casings! Alignment to casings highly recommended !!!
As an option we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
This high engine is mounted on the following 50cc motorcycles with gearboxes equipped with the MINARELLI AM3, AM4, AM5, AM6 euro 1, AM6 euro 2 engine :
-APRILIA RS AM6 engine from 1997 to 2006 (after 2006, beware of engines passed in DERBI euro 3)
-APRILIA RX AM6 engine (after 2006, beware of engines passed in DERBI euro 3)
-APRILIA MX AM6 engine (after 2006, beware of engines passed in DERBI euro 3)
-BETA CRE
-BETA RR
-BETA RR ALU
-HONDA HM
-HONDA CRE
-HONDA BAJA
-HUSQUVARNA WXE
-HUSQUVARNA CH
-HM DERAPAGE
-HM CRE
-MALAGUTI DRAKON
-MALAGUTI XTM
-MALAGUTI XSM
-FANTIC CABALLERO
- PEUGEOT XP6
- PEUGEOT XPS
- PEUGEOT XP STREET
- PEUGEOT XP STREET EVO
- PEUGEOT XR6
- PEUGEOT XR7
-MOTORHISPANIA RYZ
-MOTORHISPANIA RX-R
-MOTORHISPANIA RX
-RIEJU RS1
-RIEJU RS2
-RIEJU RS2 MATRIX
-RIEJU RS2 MATRIX PRO
-RIEJU SMX
-RIEJU MRX
-RIEJU SPIKE
-KEEWAY TX EN
-YAMAHA DT
-MBK X-LIMIT
-YAMAHA TZR
-MBK X-POWER
-SHERCO SM
-SHERCO ENDURO
-SHERCO HRD
-SHERCO ENDURO
And many other machines!
Reference: BR10EIX / 6801
NGK BR10 EIX racing spark plug, for better ignition and a performance gain.
Reference: 311.0112
POLINI bolt connection for Minarelli or Piaggio and many other models.
Reference: 204.0935/A
The famous BIG EVO piston Ø52mm for all BIG EVO Ø52mm on PIAGGIO engine like MINARELLI SCOOTER. Axis of 13mm.
Reference: 272.0145
Reinforced C-type clips, specially designed for large engine configurations and extreme conditions!
Reference: 201.0170
A special carburetor big configuration! Also available in 24, 26, 28 and 30mm!
Reference: 5216541
A very high-end clutch, reinforced with a very low price!
Reference: 280.0057
Reinforced needle cage BIG EVOLUTION POLINI Ø13mm.
Reference: 251.0033
The toric head gasket spare for the kit 80cc Ø52mm POLINI BIG EVOLUTION aluminum on PIAGGIO liquid!
Reference: 210.0069
POLINI crankshaft for the 100cc kit on MINARELLI AM6.
Reference: 200.0422
Exhaust rolled / welded special high performance for the 100 POLINI kit on minarelli am6.
Reference: 133.1012 + 200.0422 + 210.0069
Complete pack 100 POLINI BIG EVO for Minarelli am6.
Reference: 9921760
The TOP PERFORMANCES 85cc cast iron kit for minarelli AM6. This cylinder is also the spare cylinder for the maxikit with crankshaft on the am6 engine of your mécaboite.
Reference: 53470.00
The biggest kit in the world for minarelli am6 !!! Ø55mm, for 46mm stroke / 90mm connecting rod! We are a monster couple.
Reference: CK.44.852.GR2
The direct competitor of MALOSSI MHR TEAM cylinder with its 308-3 GILARDONI (Special skirt exhaust has boosters, 6 transfers), the cylinder head has stud, its very well defined diagrams ... For am6!
Reference: 9924230
The spare kit for the maxikit TPR 44mm stroke on mécaboite Minarelli AM6.
Reference: IM113
Full motor kit for motorcycle 50cc motor minarelli am6! Super coupled, powerful and robust
Reference: IM112
Full motor kit for motorcycle 50cc motor minarelli am6! Super coupled, powerful and robust
Reference: 01137550
The most powerful kit of AIRSAL house for minarelli am6! This XTREM version must be accompanied by adequate 45mm stroke crankshaft!
Reference: 53450.00
A great performance kit, 110cc monstrosity for your minarelli am6 !!! For long race 46mm rod size but original 85mm!
Reference: 30434.M3
An overpowering 90cc kit with high-end materials and extreme strength!
Reference: EQ-998-43
The famous 50mm (80cc) aluminum BARIKIT Racing race but special 43mm version sapphire piston and cylinder head stud! A powerful cylinder made with a good engine configuration. Motorcycle with 50cc minarelli am6.
Reference: CK.44.849.GR2
Top racing engine minarelli am6! Special race 44, 80cc kit Ø48mm, 6 transfers, large 32mm exhaust .... A real powerhouse, to accompany a long-stroke crankshaft and connecting rod 90mm 44,00mm only.
Reference: 11000860
A very powerful kit known and recognized by all the driver or runner on track. A kit with long study for an excellent result but not as perfect as the label.
Reference: EQ-974-S
The direct competitor of the AIRSAL X-TREM, it has a stud bolt, a sapphire blue treated piston .... A complete kit of quality, special long stroke 45mm.
Reference: CK.44.848.GR2
Top racing engine minarelli am6! Special race 44, 80cc kit Ø48mm, 6 transfers, large 32mm exhaust .... A real powerhouse, to accompany a long-stroke crankshaft and rod 85mm 44,00mm.
Reference: CK.44.952.G14
High competition engine for minarelli am6! Special race 44, 95cc Ø52mm kit, 6 transfers, large 32mm exhaust, .... A real powerhouse, to be accompanied by a 44.00mm long stroke crankshaft and 85mm connecting rod. This is the biggest kit of the ITALKIT packs.