Reference: VM.60.1
Set of 4 ITALKIT reinforced clutch springs for minarelli am6
Quality springs for your minarelli am6 equipped engines.
Banner
High competition engine for minarelli am6! Special race 44, 95cc Ø52mm kit, 6 transfers, large 32mm exhaust, .... A real powerhouse, to be accompanied by a 44.00mm long stroke crankshaft and 85mm connecting rod. This is the biggest kit of the ITALKIT packs.
Not homologated on open road, only reserved for competition on circuit, closed road.
A novelty from the great Spanish brand ITALKIT and finally available with us, the competition has only to behave. This ultra complete 95cc engine pack is mounted on mécaboite Minarelli AM6, it is the high engine used for the 95cc racing pack. This set will offer you all the power you are looking for to distinguish yourself during competition and win first place. To accompany the ITALKIT crankshaft with celeron bearings in 44.00 stroke and 85mm connecting rod. In combination with the 44 stroke, the actual displacement is 94.68cc With an original race crankshaft, a shim under the cylinder of 2.5mm will be essential.
The cylinder is made of aluminum alloy and has a specific heat treatment and an internal coating in niquel / silica, giving it all its strength and reliability. Equipped with no less than 9 lights including 6 intake transfers, 2 boosters with worked shapes and finally the impressive exhaust outlet by its shape and size to such an extent that the outlet diameter has been revised upwards and measures no less than Ø32mm (an exhaust ring is provided for the passage an exhaust in diameter Ø28mm).
In addition, the cooling has also been completely revised and corrected in order to offer the best possible heat exchange and at the same time to obtain a significant performance gain, in fact the less an engine runs out of steam and heats up and the more performance. To accompany this cylinder, a cylinder head with a competition stud! Top-of-the-range model, specially designed to offer maximum compression. The cylinder head stud is entering and mounted on an O-ring, the combustion chamber is frustoconical and has a very successful polished finish, smooth and clean.
The Ø52mm piston is not chosen at random, it is a single segment model from VERTEX with graphite treatment. In other words, very high quality material whose reputation / quality is well established. This piston is therefore equipped with a thin chrome segment 1mm thick thus promoting the increase in speed. Thanks to the graphite treatment, its shapes and its composition, this piston has been very well designed and studied in order to offer better thermal expansion. , agreeing at the same time perfectly with this cylinder to withstand frank times, sudden changes of speeds and prolonged endurance on the circuit.
Clearly, this 95cc Ø52mm racing kit for your Minarelli AM6 engine will be a major asset to offer you assured victories and guaranteed sensations! Delivered complete as presented, you can trust the photographs, they are contractual as usual.
We recommend that you accompany this pack with at least: a carburetor of 28, an intake kit in flexible assembly, ultra reinforced crankshaft ITALKIT Competition 44 stroke / 85mm rod, Selettra ignition from ITALKIT with variable advance, cold spark plug NGK B105EGV , racing engine oil compulsory, high volume racing trigger exhaust essential ....
This pack contains:
-Cylinder Ø52mm aluminum 6 transfers with large exhaust booster
-Piston VERTEX graphite mono segment Ø52mm
-Aluminum cylinder head cover
-High compression cylinder head stud, entering type of frustoconical shape, polished finish
-Segment Ø52 end chrome thickness 1mm
-Reinforced piston axis Ø14 X 37mm
-G type piston clips
-Pack of engine gasket with several base gaskets of different thicknesses
-X1 Centering pin for cylinder head
-Installation instructions
-Sticker
As an option we offer a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
This high engine is mounted on the following 50cc motorcycles with gearboxes equipped with the MINARELLI AM3, AM4, AM5, AM6 euro 1, AM6 euro 2 engine:
-APRILIA RS AM6 engine from 1997 to 2006 (after 2006, beware of engines passed in DERBI euro 3)
-APRILIA RX AM6 engine (after 2006, beware of engines passed in DERBI euro 3)
-APRILIA MX AM6 engine (after 2006, beware of engines passed in DERBI euro 3)
-BETA CRE
-BETA RR
-BETA RR ALU
-HONDA HM
-HONDA CRE
-HONDA BAJA
-HUSQUVARNA WXE
-HUSQUVARNA CH
-HM DERAPAGE
-HM CRE
-MALAGUTI DRAKON
-MALAGUTI XTM
-MALAGUTI XSM
-FANTIC CABALLERO
- PEUGEOT XP6
- PEUGEOT XPS
- PEUGEOT XP STREET
- PEUGEOT XP STREET EVO
- PEUGEOT XR6
- PEUGEOT XR7
-MOTORHISPANIA RYZ
-MOTORHISPANIA RX-R
-MOTORHISPANIA RX
-RIEJU RS1
-RIEJU RS2
-RIEJU RS2 MATRIX
-RIEJU RS2 MATRIX PRO
-RIEJU SMX
-RIEJU MRX
-RIEJU SPIKE
-KEEWAY TX EN
-YAMAHA DT
-MBK X-LIMIT
-YAMAHA TZR
-MBK X-POWER
-SHERCO SM
-SHERCO ENDURO
-SHERCO HRD
-SHERCO ENDURO
And many other machines!
Reference: VM.60.1
Quality springs for your minarelli am6 equipped engines.
Reference: ESP.07.125.4
The strongest with MALOSSI, specially lengthened for high engines with wedges for stroke or long connecting rod, withstand extreme tightening torques. Amply support 25nm (2.25 mkg)!
Reference: PI.44.52A.14
Spare piston of excellent quality for kit ITALKIT 95cc Ø52mm minarelli am6.
Reference: SE.520.10.I
High-end segment for kit 95cc diameter 52mm.
Reference: VJ.44.52
Replacement gaskets for the maintenance of your high 84cc or 95cc Ø52mm engine with 44mm stroke or ITALKIT origin on Minarelli AM6.
Reference: CU.44.95
Cylinder head (decomposable two parts) complete spare, special for the high engine running 44.00, diameter 52mm 95cc.
Reference: 01137550
The most powerful kit of AIRSAL house for minarelli am6! This XTREM version must be accompanied by adequate 45mm stroke crankshaft!
Reference: EQ-974-S
The direct competitor of the AIRSAL X-TREM, it has a stud bolt, a sapphire blue treated piston .... A complete kit of quality, special long stroke 45mm.
Reference: IM112
Full motor kit for motorcycle 50cc motor minarelli am6! Super coupled, powerful and robust
Reference: 11000860
A very powerful kit known and recognized by all the driver or runner on track. A kit with long study for an excellent result but not as perfect as the label.
Reference: CK.44.849.GR2
Top racing engine minarelli am6! Special race 44, 80cc kit Ø48mm, 6 transfers, large 32mm exhaust .... A real powerhouse, to accompany a long-stroke crankshaft and connecting rod 90mm 44,00mm only.
Reference: CK.44.852.GR2
The direct competitor of MALOSSI MHR TEAM cylinder with its 308-3 GILARDONI (Special skirt exhaust has boosters, 6 transfers), the cylinder head has stud, its very well defined diagrams ... For am6!
Reference: 30434.M3
An overpowering 90cc kit with high-end materials and extreme strength!
Reference: 53450.00
A great performance kit, 110cc monstrosity for your minarelli am6 !!! For long race 46mm rod size but original 85mm!
Reference: CK.44.848.GR2
Top racing engine minarelli am6! Special race 44, 80cc kit Ø48mm, 6 transfers, large 32mm exhaust .... A real powerhouse, to accompany a long-stroke crankshaft and rod 85mm 44,00mm.
Reference: 53470.00
The biggest kit in the world for minarelli am6 !!! Ø55mm, for 46mm stroke / 90mm connecting rod! We are a monster couple.
Reference: 133.1012
POLINI 100cc kit to install with 44mm stroke crankshaft, 95mm connecting rod and 13mm axle.
Reference: EQ-998-43
The famous 50mm (80cc) aluminum BARIKIT Racing race but special 43mm version sapphire piston and cylinder head stud! A powerful cylinder made with a good engine configuration. Motorcycle with 50cc minarelli am6.
Reference: 9921760
The TOP PERFORMANCES 85cc cast iron kit for minarelli AM6. This cylinder is also the spare cylinder for the maxikit with crankshaft on the am6 engine of your mécaboite.
Reference: 9924230
The spare kit for the maxikit TPR 44mm stroke on mécaboite Minarelli AM6.
Reference: IM113
Full motor kit for motorcycle 50cc motor minarelli am6! Super coupled, powerful and robust