- New

Banner
Attention, this cylinder is reserved for competition, not approved on the road!
Here is the 2Fast 100cc cylinder kit for Derbi Euro3 (D50B0).
Some technical data:
- Nickasil-treated aluminium
- 6 transfers of admission
- Bare escape
- 52mm bore
- Multi-fixed exhaust outlet (for 2 or 3 attachment points)
The assembly must be mounted on a crankshaft running 47mm/95mmm rod to reach 100cc.
It is therefore imperative that the crankcase be milled!
Also note that 107mm cylinder studs will be mandatory.
Advice to optimize performance:
To exploit the full potential of this 100cc cylinder kit, it will need to be combined with a hyper-racing exhaust, a specific intake with a carbu of at least 28mm and an internal rotor ignition.
For reliability reasons, it will also be necessary to invest in a reinforced clutch.
As an option, we offer a STAGE 1 preparation, this preparation includes a selection of the best part of our stock, a clear improvement in the shape and the exhaust diagram as well as a special retouch of the cylinder skirt and piston for better scanning / filling according to our best tests. An improvement in lubricating is made in view of the diets obtained after preparation.
Gets on:
APRILIA RS 50 2T LC euro 2 2006> (DERBI D50B1)
APRILIA RS 50 2T LC euro 4 2018-> (D50B0)
APRILIA RS4 50 2T LC euro 2 (DERBI)
APRILIA RX 50 2T LC 2007-> (DERBI D50B0)
APRILIA RX FACTORY 50 2T LC euro 4 2018-> (D50B0)
APRILIA SX 50 2T LC 2007-> (DERBI D50B0)
APRILIA SX 50 2T LC euro 4 2018-> (D50B0)
APRILIA SX FACTORY 50 2T LC euro 4 2018-> (D50B0)
DERBI Senda DRD PRO R 50 2T LC (D50B0)
DERBI Senda DRD PRO SM 50 2T LC (D50B0)
DERBI Senda DRD RACING R - SM 50 2T LC (D50B0)
DERBI Senda EVO SM 50 2T LC (D50B0)
DERBI GPR NUDE 50 2T LC 2006-> (D50B0)
DERBI GPR RACING 50 2T LC 2006-> (D50B0)
DERBI GPR R 50 2T LC euro 2 2012->
DERBI Senda LIMITED SM 50 2T LC euro 4 2018-> (D50B0)
DERBI Senda X-RACE R - X-RACE SM 50 2T LC (D50B0)
DERBI Senda X-TREME R - X-TREME SM 50 2T LC (D50B0)
DERBI Senda X-TREME SM 50 2T LC euro 4 2018-> (D50B0)
GILERA DRIFTING 50 2T LC euro 4 2018-> (D50B0)
GILERA RCR - SMT 50 2T LC (DERBI D50B0)
GILERA RCR 50 2T LC euro 4 2018-> (D50B0)
GILERA SMT 50 2T LC euro 4 2018-> (D50B0)
DERBI Senda X-TREME R 50 2T LC euro 4 2018-> (D50B0)
DERBI Senda RACING SM 50 2T LC euro 4 2018-> (D50B0)
Reference: IM213
Complete high-engine cast kit DERBI EURO 3 and 4! Super coupled, powerful and robust!
Reference: EQ-919-S
The direct competitor of the AIRSAL X-TREM, this one has a stud bolt, a sapphire blue treated piston, ...
Reference: 23180.00
A monster of power and especially of torque for your DERBI euro 3 and 4. At the present time nothing has come out so monstrous.
Reference: EQ-990-43
The famous 50mm (85cc) aluminum BARIKIT but in sapphire blue piston version and stud bolt! A high-performance cylinder to be accompanied by a good engine configuration. For 50cc motorcycle with DERBI euro 3 and 4 engine.
Reference: 01087550
The famous AIRSAL ROUGE X-TREM special for 45mm stroke, power and a lot of torque for a reduced price on your DERBI euro 3 and 4 motor bikes.
Reference: CK.12.881.GR
High competition engine for DERBI euro 3 and 4! Special 44.90 race, 90cc Ø50mm kit, 6 transfers, large exhaust with boosters, .... A real powerhouse, to be accompanied by a 44.90mm long stroke crankshaft.
Reference: CK.12.776.GR
High competition engine for DERBI euro 3 and 4! Special 44.90 race, 80cc Ø47.6mm kit, 6 transfers, large exhaust with boosters, .... A real powerhouse, to be accompanied by a 44.90mm long stroke crankshaft.
Reference: CK.12.788.GR
High competition engine for DERBI euro 3 and 4! Special race 42, 75cc Ø47.6mm kit, 6 transfers, large exhaust with boosters, .... A real powerhouse, to be accompanied by a 42.00mm long stroke crankshaft.
Reference: 9934260
Top competition engine for DERBI euro 3 and 4! Special 44mm race, 86cc Ø50mm kit, 5 transfers, large oval exhaust. A real concentrate of power, to be accompanied by a 44mm long stroke crankshaft.
Reference: IM212
Complete high-engine cast kit DERBI EURO 3 and 4! Super coupled, powerful and robust!
Reference: CK.12.952.G14
High motor of competition for DERBI euros 3 and 4! Special Race 45, kit 90cc Ø52mm, 6 transfers, large booster exhaust, ... . A real concentrate of power, to be accompanied by a crankshaft long race 45mm.
Reference: 3119145
Monstrous novelty 2025! Completely crazy engine to accompany vilo race 47mm and a machining crankcases!
Reference: 11000783
High specific WR competition engine for long races 44,9mm on DERBI EURO 3.