Reference: 11220870
BIDALOT cylinder head cover for RACING FACTORY kits on Minarelli am6 and DERBI euro 1, 2, 3 & 4
Ideal to give a racing look to your engine or wear!
Banner
The presented version is pictured FACTORY. Reserved only for circuit racing.
2014 Big news !!! Here is the new top BIDALOT RACING FACTORY 94cc engine Ø50mm diameter for DERBI euro 1 and euro 2 Available in Version FACTORY or FACTORY LABEL (prepared directly from Bidalot), this kit reaches the capacity of 94cm3 with the crankshaft (mandatory fitting with it ) race 48,00mm ref. 12100972. Developed and studied by BIDALOT, this set is specially designed for circuit competitions, runs ....
What he has been more compared to the old version of 94cc? In fact many changes were made as the 6 transfers and exhaust to strip corrected and revised upwards. All adapted to the new 50mm bore diameter. These changes were well on a single goal, always optimize more power at high rpm while maintaining maximum torque and power at low and mid range.
Its piston is a top racing model mono segment range special long stroke (51mm length) which will reduce friction and therefore increased high speeds. It has a new profile and is equipped with a ground-end chrome steel curved segment, its axis 13 X 40mm and reinforced clips. Delivered 100% complete, you will have full pack seals with different base gasket thicknesses and an aluminum base plate wedge 4mm thickness allowing you to tweak your settings at the squish.
Another addition to this high engine was brought directly into the design of the cylinder which is seen adding 4 fixing screws for the cylinder head stud. The cylinder is obviously still in aluminum with its specific treatment and coating nikasil. The cylinder head stud preserves its high compression combustion chamber and is accompanied by the famous blue head cover billet.
A needle cage Ø13 X Ø17 X 17.5mm comes with all the fastenings required for assembly of this kit. A leaflet in French accompany you in the assembly with the recommendations of the brand BIDALOT for calibration of high engine as well as the specifics of the version of LABEL. This latest version (LABEL) is available with an average delay of another month.
Why so long? For the simple reason is that the top engine is completely modified by the brand of running service. Preparations Account drop handmade and special machine at the foundry cylinders. This preparation for the craziest of you has a multitude of changes are:
-Changes Distribution heights
-Modification And optimization scans angles (horizontal & vertical)
-modification Of the height and shape of the light / exhaust outlet
-Prepare The cylinder skirts
-Optimization The geometry of the "hollowed" of the exhaust strip
-Metrology And pairing cylinder / piston optimized
-Retouche Segment of beaks
-Check And the game Adjustment segment Cup
-Numérotation Of each cylinder for unique, genuine and verifiable preparations (to prevent copying and preparation dubious nickname Label ...).
-This LABEL version does go up with the crankshaft Racing Factory race 48,00mm (ref. 12100972)
Before adding to cart, be sure to select the desired version.
BIDALOT This pack contains:
Aluminum master cylinder diameter Ø50mm 6 transfers with big exhaust with bar
Blue aluminum cylinder head -Couvercle
Yoke -Plot
-piston Mono segment Ø50mm
-Segment Chrome steel Ø50mm X 0,8mm thick
Axis-piston internal external Ø13mm X 40mm X length Ø9mm
Piston -Clips Type C for axis Ø13mm X 1mm thick material
-Cage Needle internal external Ø13mm X Ø17mm X 17.5mm length
-X4 Studs reinforced M7 X 114mm length
-X4 Breech nut reinforced M7
Stud fastening -Visserie and head cover
-Cale Of machined aluminum base
-X7 Breech ring seals
-X7 Aluminum base seals with different thicknesses
Mounting the high engine -Notice
-certificate Authenticity of the cylinder (provides in the case of a label prepared cylinder BIDALOT)
-Autocollants
We recommend to accompany this pack 94cc engine with top: a flexible mount for big carburetor carburetor carburetor Ø34mm, competition NGK R6252E105, exhaust Factory Racing 88 / 94cc specially designed to be assembled with the motor, ignition advance with Racing Factory variable internal rotor without lights, crank Racing Factory long race 48,00mm, oil motor racing 100% synthetic ....
Reference: 11220870
Ideal to give a racing look to your engine or wear!
Reference: 12100972
Soon available, the 48mm stroke crankshaft for DERBI euro 1 and 2 engine! Ideal to be as close as possible to the square race with a Ø47.6mm kit.
Reference: 11335966
Piston forged high-end parts for kit BIDALOT FACTORY 86, 88 and 94cc on DERBI, AM6 Minarelli and Horizontal.
Reference: 11352962
Segment alternative ideal for quality refurbish your segmentation kit BIDALOT Factory.
Reference: 81200305
High-end needle cage to be changed every 5,000 km, ideal for the biggest kits on the market.
Reference: 11501870
Complete cylinder head O-ring cover for BIDALOT Racing Factory high engine on DERBI engine.
Reference: 11210972
BIDALOT spare cylinder head stud for Racing Factory 2014 94cc displacement kit on DERBI Euro 1 and 2.
Reference: 12512972
Reinforced and treated high-end stud for high engine BIDALOT Racing FACTORY.
Reference: 11500872
Complete gasket set for the maintenance of your high engine 88/94cc BIDALOT Racing Factory on DERBI euro 1 and euro 2.