Reference: 57840.16
Chrome racing segment s10 Ø50mm X 1mm for PARMAKIT aluminum kit DERBI, AM6, scooter, ...
Replacement segment essential for the maintenance of your 50mm diameter cylinder.
Banner
Attention, prohibited on the road! Reserved for competition only, in no case complies with traffic laws.
Here is the most huge kit released for vertical minarelli (booster). This kit is the RACING model from PARMAKIT (above the TP RACE and RACE ONE). This is the Ø50mm aluminum model kit for long race 43mm (also exists for original race). Can be installed with a long 85mm long rod stroke with a 5mm shim!
This kit is therefore only reserved for the PARMAKIT GP1 43mm long stroke crankshaft and 80mm connecting rod or 85mm connecting rod but with a 5mm shim . It cannot be fitted with another crankshaft. With its diameter of 50mm and a long stroke 43mm, the actual displacement is 84.43cc, relatively huge for the small engine of the booster.
Attention the assembly of the vilo requires modifications and therefore the assembly of this cylinder also requires it! The outer diameter of the skirts is 54.50mm at the bottom and 55mm at the top. You will therefore need to machine the casing skirt foot. This kit has really been worked to the maximum in order to bring all the assets together.
First let's talk about the cylinder, it is a high-end alloy model treated with high quality nykasil, the diagrams are very good, the intake is completely revised for a good filling, the base has been redesigned, also will have to align your casings to the latter. The exhaust has finally been completely revised to finally give way to a large exhaust with barette! PARMAKIT has opted for a pure flat vertex.
This piston has lateral grease nipples and is in a hard chrome domed pre-ground segment. Very good material. The cylinder head is a female model (the cylinder head enters the cylinder head) in order to have a chamber / bore alignment always perfectly centered!
In addition this system also makes it possible not to break the cylinder head gasket which passes very limited with a bore such ... This cylinder head is provided with a studied cooling, a polished hemispherical high compression chamber adapted to the flat piston ...
Reference: 57840.16
Replacement segment essential for the maintenance of your 50mm diameter cylinder.
Reference: 57840.02A
Piston by VERTEX mono high-end segment for kit 80 and 90cc diameter 50mm.
Reference: 76710.03
Essential for the refurbishment of your high engine PARMAKIT 77 / 85cc diameter 50mm.
Reference: 76710.04
Aluminum cylinder head for kit replacement PARMAKIT 77 / 95cc on vertical GP1 minarelli scooter.
Reference: 76720.00
Kit ultra powerful, best of all for vertical! A ride with 43mm crankshaft race!
Reference: 76810.00
A high reliable engine, solid and efficient for your vertical minarelli scooter. Special for long race 43mm with 80mm rod. Sport version.
Reference: 074700/1
A kit with amazing powers, the premium finish to a significant performance gain while maintaining excellent strength. A kit tested / approved and recommended by the RRD team.
Reference: 76835.00
A high reliable engine, solid and efficient for your vertical minarelli scooter. Special for long race 43mm with 80mm rod. Version RACE ONE.