- -8%
Reference: 27 2728.C0
Set of 3 pre-cut MALOSSI carbon valve slats Peugeot fox, scooters & Honda wallaroo
Out of the ordinary finish. Here are valves that will bring you reliability, longevity and power.
Banner
A solid and torquey 70cc high engine without cylinder head, ideal for increasing your performance, to accompany your original cylinder head or high compression MALOSSI .
Not homologated for public roads, does not respect the authorized displacement of 50cc.
To be accompanied by your original cylinder head or MALOSSI available from us as an accessory link.
Here is the cylinder without cylinder head 70cc in diameter 47mm from MALOSSI , cast iron kit with its reinforced piston - prepared and its 2 segments, it is really very solid but also powerful by its well defined diagrams, its diameter of 47mm and its admission. The 6 transfers are clean and very well finished with an oval exhaust outlet like the original but significantly increased in comparison to the latter.
It comes with carbon valves allowing it to be very complete and efficient, we recommend it to those who want to ride every day (outside France) and have a lot of torque and without neglecting the tip. This type of cylinder can easily cover 25,000 km by changing the piston every 10,000 km.
In the unprepared version, it can develop a maximum of 8 horsepower. It also has the reinforced O-ring cylinder head gasket which is not negligible on this type of engine because it guarantees better compression and engine sealing.
We recommend that you accompany this high engine with at least : original cylinder head in excellent condition or MALOSSI high compression, a carburetion adapted from 17.5 to 21mm depending on your use, mandatory adjustment of your transmission / variator, exhaust muffler racing, racing spark plug, 100% synthetic engine oil, reinforced crankshaft with bearings for the best...
This pack contains :
-Cylinder Ø47mm cast iron
- Piston bi-segments Ø47mm with side greasers and preparation on the rear apron
-X2 segments Ø47mm thickness
-Axle and piston clips Ø12mm
-Carbon valve slat
-Exhaust studs
-Reinforced gasket pack
-Stickers
-Notice, user manual
Mounts on :
Daelim Cordi 50 AC 2T 2005
Daelim Message 50 AC 2T 1998
Honda Dio 50 AC 2T 1988-1992
Honda Dio Fit 50 AC 2T 1990-1993
Honda Dio G/ GP 50 AC 2T 1989-1990
Honda Dio SR 50 AC 2T 1990-1993
Honda Dio SR/ SP 50 AC 2T 1988-1992
Honda Dio ZX/ SR/ S 50 AC 2T 1990-1993
Honda Giorno 50 AC 2T 1992-2000
Honda Joker 50 AC 2T 1998-1999
Honda Shadow- SRX 50 AC 2T 1998-1999
Honda Tact 50 AC 2T 1989-1998
Honda Tact S 50 AC 2T 1993-2001
Kymco CX 50 AC 2T 1993
Kymco CX Super 50 AC 2T 1994-1997
Kymco DJ Refined 50 AC 2T 1993-2006
Kymco DJ World 50 AC 2T 1995-1997
Kymco DJ-X 50 AC 2T 1991-1992
Kymco DJ-Y 50 AC 2T 1993-2006
Kymco K12 Sport 50 AC 2T 1995-2000
Kymco KB 50 AC 2T 1995-2000
Kymco Scout 50 AC 2T 1999-2002
Kymco ZX 50 AC 2T 1999-2002
Kymco ZX II 50 AC 2T 2003-2006
Sym DD 50 AC 2T 2003-2008
Sym DD 50 AC 2T od 2010
Sym Flash 50 AC 2T 1996-2000
Sym Free 50 AC 2T 1996-2000
Sym Pure 50 AC 2T 2003-2008
Sym Super Fancy 50 AC 2T 1996-2006
And other models...
As an option we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement of the piston and the lower skirts is also included in this modification. Count a little extra time for this preparation!
Reference: 27 2728.C0
Out of the ordinary finish. Here are valves that will bring you reliability, longevity and power.
Reference: 27 2728.KO
Set of 3 blades for push or original engines. To make a perfect adjustment of your gear.
Reference: 36 4450
Do not forget to change at each winding to prevent engine failure thereafter.
Reference: 19 3298E
Set of 2 M6 studs which can be used for many applications.
Reference: 2311783B
Piston pin with shaped clips "C", essential for refurbishment quality and reliable.
Reference: 35 4501
Ideal in case of starting tightening, heating ... for refurbishment!
Reference: 34 7036
The spare piston diameter 47mm for 70cc MALOSSI cast iron kits on scooters like HONDA, PIAGGIO, PEUGEOT, MINARELLI VERTICAL and HORIZONZAL ...
Reference: 11 9574
Ideal for safe and leak-free reassembly.
Reference: 06 4993B
Spare O-ring for the refurbishment of your engine compression!